Search
- Strand Tracking Problems on Your Slitter/Rewinder
- (Magazine)
- April 30, 2002, ... problem, but the result is the same: wound rolls with shifted layers. To check for this, use a dial indicator to determine if the slitting knives shift laterally during rotation or under load. You would ...
- Products
- (Magazine)
- October 31, 2001, ... table is designed to enable printers to view the full surface of a 28×40-in. sheet for quality control. Enables operator to look for surface defects, spray powder coverage, or dull slitter or sheeter knives. ...
- What's New Product
- (Magazine)
- September 30, 2001, This month's is on slitting knives. For a look at trends in slitting knives, see p. 178. Bagmaker Creates Host of BagsItalwork, Magenta, Italy; +39 029794560The This month's “Focus” is on slitting knives. ...
- New Materials Extend Wearability and Blade Life
- (Magazine)
- September 30, 2001, ... finish of the knives should be very smooth to ensure that no undue dusting is produced. This Ra should be 8 or less. “The further development of slitting technology lies in the hands of metallurgists,” ...
- Materials
- (Magazine)
- September 30, 2001, ... paper and paperboards, PET, PE, PS, and thin embossed films. Tape is also tearable, so knives are not necessary when making splices, emphasizing safety and convenience for operators, co. says. Film ...
- Slitting Adhesive-Coated, Low-Strength Films
- (Magazine)
- September 30, 2001, ... move together during blade oscillation. Free-turning rotary knives can be used in the same fashion as described above, except there is no need to oscillate the knives in the plane of the web. One of ...
- Slitting Survey
- (Magazine)
- July 31, 2001, ... features 4.5 56% Differential winding technology 4.4 48% Ability to specify whose controls (i.e., drives, brakes, web guides, knives, tension controls, etc.) will be used 4.1 36% Remote ...
- Slitter Savvy: Visual Roll Defects & Remedies
- (Magazine)
- July 31, 2001, ... with mandrel-mounted bottom knives after the mandrel has been reground one or more times. Remedies: Ensure that run out of bottom knives after grinding does not exceed the thickness of the webs. ...
- Products
- (Magazine)
- June 30, 2001, ... mfr. says. Knives Feature Larger Carbide Inlay Advetech, Canfield, OH; ph: 330/533-2227; 800/248-7421; fax: 330/533-5740. Carbide sheeter and circular slitter knives feature larger carbide inlay for ...
- Products
- (Magazine)
- April 30, 2001, ... to be sheeted in-line with another process. Sheeter's cutting section is said to be completely accessible, with two knives mounted in rotating cylinders. Can handle cut lengths from 11 — 2,000 in. at speeds ...
- Pellet Transfer: Preventative Measures Employed to Reduce Streamer Formation
- (Magazine)
- April 30, 2001, ... of ineffective pellet cut at the resin supplier. As molten polymer passes through the die plate, the pelletizing knives do not achieve an effective cut. Essentially, the pellet has an attached “tail.” ...
- Products at CMM
- (Magazine)
- March 31, 2001, ... three types of driven anvil knives, which are selected according to machine width, minimum slit width, running speed, and web material. Seven different enhancement modules can be added, ranging from a ...
- Web Handling...Making a Slitter/Winder Upgrade Work for You
- (Magazine)
- March 31, 2001, ... buying one of these devices. Slitting Process Guidelines The converter must decide which method of cutting (razor or shear knives) is best for his/her product. Following are points to ...
- Products
- (Magazine)
- February 28, 2001, ... raise; reduced buildup on knives; and faster setting speeds. Brake Line Is Economical Electroid Co., Springfield, NJ; 908/753-5402 “Temporiti” AC brakes are described as cost-effective, high quality ...
- Materials
- (Magazine)
- December 31, 2000, ... on knives; faster setting speeds; and excellent holdout on recycled or highly absorbent substrates. UV Flexo Inks Offer Detail and Gloss Sericol Inc., Kansas City, KS; 913/573-3577 UVivid 800 is a ...
- Converted Solutions Slitter/Rewinder Boosts Productivity on Laminating Line
- (Magazine)
- March 31, 2000, ... single-shaft, center surface machine with a maximum web width of 3,400 mm. Multiple full-width slitting is achieved with dovetail-mounted, crush-cutting knives cutting against a hardened anvil, crush-cut ...
- NOVA and Union Carbide to build ethylene plant
- (Magazine)
- October 31, 1996, ... speeds to 300 m/min. High-precision tungsten carbide knives ensure micrometer accuracy. The slit tapes then pass through a tape wire assembly that cleans both sides before center-winding it into individual ...
- Bagmaking machines adapt to conquer new markets.
- (Magazine)
- July 31, 1996, ... drives include extremely accurate stop and start, the ability to accurately repeat a move, and the ability to stop and hold a position while hot knives perform sealing and cutting operations. The newer ...
- Laser positioning system creates clean, productive environment
- (Magazine)
- April 30, 1996, ... the web. In order to keep dust to a level that permitted customers to do their printing and other follow-up operations, top male knives would be changed weekly and bottom female knives about every six ...
- Tissue converter accrues benefits of AC servo drives
- (Magazine)
- September 30, 1995, ... the final folder, using a 3,000-rpm digital servomotor with a 150-amp amplifier. This section comprises seven slitting knives; five slitting knives cut the single roll of tissue into six smaller webs that ...