Primers

Primera Announces LX610 Color Label Printer with Built-In Digital Die Cutting™

(News | New Products)

February 04, 2020, Primera Technology, Inc. announced that it is shipping its new LX610 Color Label Printer/Cutter.   Primera Technology, Inc., (Primera) announced that it is shipping its new LX610 Color Label Printer/Cutter. ...

Primera Offers Label & Tag Printer

(News | New Products)

May 19, 2018, The RX500 on-demand color RFID label printer encodes, verifies, and prints in a single pass PLYMOUTH, MN | Primera Technology, a global designer and manufacturer of specialized digital printers, announces ...

Sticking With It | Hot Melt PSA Primer

(Coating/Laminating)

March 26, 2018, Adhesives expert Ingrid Brase explains how hot melt pressure-sensitive products are created. Adhesives expert Ingrid Brase explains how hot melt pressure-sensitive products are created. My last offering ...

Sticking With It | PSA Acrylics Primer

(Sticking With It)

February 12, 2018, Adhesives expert Ingrid Brase peels back the curtain to show how chemists build performance into pressure-sensitive systems. Adhesives expert Ingrid Brase peels back the curtain to show how chemists ...

ACTEGA Kelstar Launches Digital Primers

(News | New Products)

October 03, 2015, ACTDigi Near Line Digital Primers reportedly will allow for optimal priming for acceptance of liquid electrophotographic toner technology DELRAN, NJ | ACTEGA Kelstar, a supplier of specialty coatings ...

LexJet Supplies Michelman Primers for HP Indigo Presses

(News | New Products)

October 20, 2014, Michelman primers offered by LexJet for the 20000 and 30000 digital presses include DigiPrime 050 and DigiPrime 060   SARASOTA, FL | LexJet now supplies in-line primers from Michelman, Cincinnati, ...

Primera Technology Announces Matrix Removal System

(Label/Tape News)

March 06, 2013, The FX1000 automates waste label matrix removal, slitting, and rewinding   PLYMOUTH, MN | Primera Technology, a manufacturer of specialty printers, is now offering the FX1000 matrix removal system. ...

Primera Technology Offers Printers in a Wide Range

(Label/Tape News)

February 10, 2013, The LX900 is the company’s fastest inkjet printer, and joins others in a variety of speeds and capabilites   PLYMOUTH, MN | Primera Technology offers its fastest inkjet printer, the LX900 color label ...

LexJet Supplies Primers for HP Indigo Presses

(Coatings)

February 03, 2013, ... support of the full range of Michelman primers for HP Indigo digital presses and Utopia digital coatings products, brings its background and expertise in the wide-format inkjet printing market, logistics, ...

What's New with Primers, and a visit to old friend

(Tom’s Poly Ploys)

October 17, 2012, ... and abroad, so I decided to visit to see what was new in the world of water-based primers. In the world of laminating, all materials do not adhere well to all other materials.  The standard substrates ...

Primers from Mica Aid in Extrusion Coating PP

(Coating/Laminating)

December 18, 2011, Adhesion, which is key in the extrusion coating and laminating of polypropylene, is improved with several new primers from Mica Corp.  SHELTON, CT | Mica Corp. has launched several primers said to ...

Polymer-Based Primer Coatings for Plastic Films Are Laser Printable

(Coating/Laminating News)

November 22, 2011, Akron Rubber Development Laboratory's (ARDL) PolyData water-based computer-imprintable top coating or printing primer allows film labels to accept standard printing. AKRON, OH | Akron Rubber Development ...

Primer Aids Ink Transfer

(Coating/Laminating)

June 30, 2011, DigiPrime 6029 HP-approved primer for WS6000 Series Indigo presses is said to produce superior ink transfer, ink adhesion, and rub resistance on embossed DigiPrime 6029 HP-approved primer for WS6000 Series ...

Primer for Strong Adhesion

(Coating/Laminating)

September 30, 2010, Michem Flex P1883 water-based extrusion primer is said to provide strong adhesion to aluminum foil and paper, bond well to extrusion-coated resins, and Michem Flex P1883 water-based extrusion primer is ...

Primer for PET Films

(Coating/Laminating)

August 31, 2010, Water-based primer designated I-372-C is said to provide excellent weatherability, non-yellowing characteristics, and a reliable and durable solution Water-based primer designated I-372-C is said to provide ...

Primer Is Tough

(New Products)

December 31, 2009, Polaqua 710 water-based primer is said to provide excellent resistance to grease, oil, and moisture using only small quantities. Suited for paper and Polaqua 710 water-based primer is said to provide excellent ...

Primer for High Bonds

(New Products)

October 31, 2009, Polaqua 507 water-based p rimer is said to be well suited for extrusion and laminations to clay-coated paper surfaces. Company says highest bond strengths Polaqua 507 water-based p rimer is said to be ...

Water-Based Primer & Adhesion Promoter

(News Eclips)

February 04, 2009, ... urethanes for adhesive laminations. New water-based primer and adhesion promoter can be applied to plain and printed films prior to the adhesive lamination step to achieve cures up to five times faster ...

RFID Primer

(Magazine)

June 29, 2005, ... this "RFID Primer," we discuss the most basic component of them all—the anatomy of an RFID label. Making the Label Okay, you’re interested in making an RFID label, but you’re not sure if it’s right ...

Using a Chemical Primer for High Bonds & Low Oxygen Transmission

(Magazine)

April 30, 2004, Application: A new aqueous primer can produce strong adhesion and low oxygen transmission rates in plastic packaging laminates. The coating has use in-line as an extrusion primer or applied to a film and ...

Answer Your RFID FAQs with AIM's RFID Privacy Prime

(News | New Products)

November 22, 2003, AIM says its primer RFID FAQs, Not Fiction addresses commonly asked questions and misconceptions about radio frequency identification technology, its applications, and privacy concerns. PITTSBURGH, PA, ...

An Envelope-Maker's Prime

(Office Products)

June 30, 2002, How to Avoid the Way of the “Buggy Whip”: For today's envelope makers — a niche hugely impacted by electronic communication and plagued by overcapacity—such a primer would serve as a valuable tool. How ...

Coaters and Primers: Should You Apply In- or Out-of-Line?

(Magazine)

July 31, 2001, Many converting operations involve application of a coating or primer to a substrate. Two application techniques are possible: in-line or out of line. Many converting operations involve application of ...

A Primer on How to Put Substrates Together

(Unprinted Rolls)

February 28, 2001, ... resin supplier is not making the film. Where Do Primers Fit In? The discussion above on extrusion coating and extrusion laminating did not mention a very important requirement of many extrusion operations ...

The Influence of Aluminum Gauge on the Adhesion of Extruded Polyester to Foil Using Adheisve Primers

(Magazine)

December 31, 2000, Application: Adhesion primers are effective when the thickness of polyester resin extrudate to aluminum substrate thickness exceeds a ratio of 0.7. Author email: This email address is being protected from spambots. You need JavaScript enabled to view it. Peer Reviewed ...

Beyond the Roll: Dry Ice Blasting for Maintenance and Cleaning

(Web Handling)

June 24, 2020, ... effective, does not generate secondary waste and sometimes is the only way to solve a company’s problem. This article is meant to be a primer for people considering using dry ice in their operation. ...

The Back Page: Taking it back 54 years

(News | New Products)

April 23, 2020, ... and primers used in laminating or extrusion coating on reverse printed polyesters. Recent studies indicate that corona discharge treatment of the polyester will alter the surface energy of polyesters ...

Loparex Selects Sung An Machinery Co. Ltd. New High Performance Tandem Extrusion Machine

(Extrusion Coating)

February 04, 2019, ... latest printing, primer coating and extrusion technology advancements. “Loparex is committed to the release liner market and the support of our customers’ growth plans,” said Jan Hilbrink, managing director ...

Will it Process?

(Extrusion Coating)

December 11, 2018, ... coatings, primers, protective coatings and release lacquers, etc., are all up for consideration. Quality control, test and product development devices have much to offer, reducing waste, speeding throughput ...

An In-Depth Look at Extrusion - Part 1

(Tom’s Poly Ploys)

September 11, 2018, ... stand, corona treater, liquid primer, flame treating, coating/casting section, 3-extruder system with coextrusion feedblock, beta-gauge, and winder.  The nip roll on this laboratory line can be substituted ...