Cores
- WHAT'S NEW PRODUCTS: June 200
- (New Products)
- May 31, 2009, ... mounting provisions. ▶Converter Accessory Corp. | 800-433-2413 | www.converteraccessory.com Circle 405 or visit www.freeproductinfo.net/pff Reuse Cores, Recycle Scrap The Safe-Slab Core Recycler ...
- Stress & Strain
- (Archive)
- May 31, 2009, ... starting a new core — possibly tens of new cores — the slitting process has many stops and starts. This can lead to a good amount of process time spent in accelerating and decelerating. During rapid ...
- Lean & Green
- (Substrates)
- May 31, 2009, ... lines offer eye-catching brilliance with no film layer to see through. Metallized board reportedly scores, folds, and embosses better than film, without the tendency to curl or flake off. Products are ...
- NEW PRODUCT DIGEST - May 2009
- (New Products)
- April 30, 2009, ... introduced. Visit booth 517. ▶Polytype America Corp. | 201-995-1000 | www.polytype.com Circle 402 or visit www.freeproductinfo.net/pff Get Core Traction DuraCores plastic cores now are available ...
- Canadian School Students Win 2009 Phoenix Challenge
- (News | New Products)
- April 29, 2009, ... Mississauga, Ontario, Canada. The pair won the first-place award by earning this year’s highest combined scores in the contest’s five exams: written knowledge, math, pre-press proficiency, press operation ...
- Caraustar Introduces Printing Process for Tubes
- (News Eclips)
- March 15, 2009, Caraustar Industries Inc. has introduced Verti-Print, a printing capability for paperboard tubes and cores ATLANTA, GA | Caraustar Industries Inc. has introduced Verti-Print, a printing capability for ...
- What's New Products: March 200
- (Magazine)
- February 28, 2009, ... larger cores. An inflated pneumatic bladder provides high-torque engagement for gripping cores. Dual chucks can share an air configuration for faster setup. Eliminate need for expensive shafts sized for ...
- What's New Product
- (New Products)
- November 30, 2008, ... design eliminates the need to handle heavy coreshafts. Offered in standard widths to 32 in. and standard diameters to 72 in., with wider widths and custom engineered features available. Martin Automatic ...
- What's New Product
- (New Products)
- October 31, 2008, ... safety brake. AzTech Converting Systems | 800-829-8351 | www.aztechconverting.com PFFC-ASAP 403 Handle Cores Effectively Core adapters with company's Cor-Lok core support technology use sleeve-based ...
- Slitting & Rewinding Seminar at CPP Expo/PACK Expo
- (News | New Products)
- October 14, 2008, ... the seminar, designers and manufacturers of slitting and rewinding equipment will take a step-by-step approach through the best practices techniques in such areas as winding, slitting, cores and cutting, ...
- Get a Grip
- (Narrow Web)
- September 30, 2008, ... on another machine works by loading a stack of cores and spacers laterally against a fixed collar. Cores are allowed to rotate, but spacers are keyed and rotate with the shaft at a set overspeed. A ...
- Do You Have a Need for Speed?
- (Web Lines)
- September 30, 2008, ... uncontrollably vibrate or buckle. You don't ever want to see your rollers or cores beyond their critical speed because they will actually explode. So far, we've addressed equipment issues; what about the ...
- What's New Product
- (Magazine)
- September 30, 2008, ... as well as tips for cost-effective project engineering. Bosch Rexroth | 800-322-6724 | www.boschrexroth-us.com PFFC-ASAP 435 Cut Cores with Quick Changeover Patented Instant Diameter Change (IDC) ...
- Fibermark Rolls Out 'Naturally Creative' Campaig
- (News | New Products)
- July 21, 2008, ... The positioning also underscores FiberMark's environmental sensitivity, which it says imbues all aspects of its business, from FSC certification of its products to the innovative green manufacturing processes ...
- Carton & Box Reporter
- (Carton Box)
- May 31, 2008, ... PFFC-ASAP 321 Tote Machine for Dual Sheets In-line dual triple-wall tote machine scores and glues two triple-wall sheets together and feeds them into a compression section where they are allowed to ...
- Narrow Web & Label Reporter
- (Label/Tape)
- April 30, 2008, ... rollers. Incorporates static heat conductive rollers immediately adjacent to the UV lamphead on the press, where air is directed through the inner cores of the roller to remove the heat. Permits many films ...
- What's New Product
- (Magazine)
- March 31, 2008, ... start-up, and other paper waste rolls from their cardboard cores without touching the core. Said to provide high-purity paper reduced to a manageable size for feeding shredders quickly, safely, and easily. ...
- Small Diameter Tape, Ribbon, and Bagmaking Shafts
- (Archive)
- March 20, 2008, ... in diameter for tape, ribbon, and bagmaking machines. The Model LDX small diameter design features three expanding rubber gripping ledges at 120 degrees apart to center and grip cores. All the shafts are ...
- TOP 10 EClips PFFC's electronics clipping service for converter
- (New Products)
- February 29, 2008, ... PFFC-ASAP 309 #6 Web Cleaning Sleeves Are Disposable Jemm-Tac web cleaning sleeves slide over existing idler rollers, reportedly eliminating the need for special roller cores. The rubber sleeves ...
- Metal Is in the Mix
- (Metallizing)
- February 29, 2008, ... less expensive and source-reduced alternative to a foil/paperboard structure that would have been prone to cracking at the scores. Fan Fares Sweeping yet another category, Unifoil Corp. took both ...
- Fundamentals for Converters
- (News | New Products)
- February 25, 2008, ... nonwovens, and other continuous flexible materials and the processes of winding, slitting, cores and cutting, retrofitting chucks, shafts, spreading, and guiding. Beginners as well as experienced personnel ...
- February Narrow Web & Label Reporter
- (Narrow Web)
- January 31, 2008, ... can be wound onto both 1- and 3-in.-dia cores. Maximum working width is 1,600 mm. Laser core-positioning, automatic edge control, and frictioning guarantee high finished roll quality and open up other ...
- Differential Rewind Shafts
- (Archive)
- December 08, 2007, Goldenrod Corp. has released the 1250-DFX model differental shaft, which winds multiple webs of varying guage thicknesses by imparting just the right amount of resistance to the core ID. BEACON FALLS, ...
- Differential Winding Limits: Part II
- (Magazine)
- November 30, 2007, ... differential shafts but to avoid the frustration that occurs when delivered results don't meet expectations. Axial-Loading Systems Axial-loading differential shafts stack alternating cores (or cores ...
- Slitting & Rewinding Fundamentals for Converters
- (Archive)
- November 06, 2007, ... who design and manufacture slitting and rewinding equipment will take you step by step through the best practices techniques in such areas as winding, slitting, cores, and cutting, retrofitting, chucks, ...
- Differential Winding Limits: Part I
- (Web Lines)
- October 31, 2007, ... differential shafts have their torque regulated by air pressure, either the air pressure that pushes laterally on a stack of slipping cores and locked spacers or that pushes radially from an internal bladder ...
- New Products, Part 1
- (Magazine)
- October 31, 2007, ... Components Company offers customized spool components, including spool cores, anchor spool plugs, and spool ends. Can be ordered as individual components or as pre-assembled spools. Unassembled spools ...
- Slitting & Rewinding Fundamentals for Converters
- (Archive)
- October 28, 2007, ... areas as winding, slitting, cores and cutting, retrofitting, chucks, shafts, spreading, and guiding. PRESS RELEASE The CEMA Slitting & Rewinding Fundamentals for Converters Seminar will be held November ...
- Slitting & Rewinding Fundamentals for Converters
- (Archive)
- October 11, 2007, ... areas as winding, slitting, cores and cutting, retrofitting, chucks, shafts, spreading, and guiding. PRESS RELEASE The CEMA Slitting & Rewinding Fundamentals for Converters Seminar will be held November ...
- SHEAR Strategy
- (Flexpack)
- September 30, 2007, ... differential shafts for accurate tension control, and a laser system guides the operator in placing the rewind cores during roll changes. Finished rolls are transferred onto a roll stand for easy handling. ...