Search
- Waste Not: Waste Management in Europe's Packaging and Label Industrie
- (Magazine)
- June 30, 2002, ... creates waste during production. The label printer creates waste during conversion — label matrix, offcuts, and trim. The packaging manager is left, after label application, with siliconized release liner ...
- Products: Edited by Deborah Donberg
- (Magazine)
- May 31, 2002, ... that eliminate trapped air, and lay-on rolls. Features two holders for razor blades if materials must be slit or trimmed. Core Plugs Offer Protection Niagara Plastics Co., Erie, PA; 800/458-0465; niagaraplastics.com ...
- Presses Have Converter in Fine Form
- (Magazine)
- May 31, 2002, ... stitcher/folder/trimmer/collator and a Baum folder in its finishing department; one Heidelberg Polar cutter and two CPM Milacron ProCut cutters; and two collators. According to O'Connor, the Power Pro ...
- The Good and Bad Sides of Offset Powder
- (Magazine)
- April 30, 2002, ... they sometimes can contribute detrimental characteristics. In applications in which a printed substrate undergoes further converting when perfect surface appearance is a requirement, use of offset powders ...
- New Products for the Narrow Web Converting Industry
- (Magazine)
- April 30, 2002, ... shear, score, and razor slitting to 0.032 in.; and vacuum edge trim removal. “Double-Barreled” Treater Runs Hot, Fast Pillar Technologies, Hartland, Wl; 888/745-5276; pillartech.com A double-electrode, ...
- Cutting to the Chase
- (Magazine)
- April 30, 2002, ... coating with a narrow groove pattern. The grooves relieved the air entrainment without having detrimental effects on the thin web material, says Klei. With good contact between the web and the rollers, ...
- Diverse Products Meet Many High-End Needs
- (Magazine)
- February 28, 2002, ... decals, automotive trim, holograms, specialty packaging, and solar control window films. Chemistry and Clean Rooms CPFilms' release coatings are applied in a self-contained facility with two coaters. ...
- Coating and Laminating Special Report
- (Archive)
- February 28, 2002, ... the coating and laminating value chain, consolidation is occurring—though often to the detriment of the supply side, due to the increasingly dominant end-users, who are leveraging their purchasing power. ...
- Shaft Collar Decisions Can Be Momentous
- (Magazine)
- January 31, 2002, ... the shaft to the core. Some operations, such as low-speed take-up of trimmed foil edge waste, do not require a high degree of synchronization between core and shaft rotation. In fact, many converters ...
- Valmet Tech Center to Open for Converters Worldwide
- (News | New Products)
- January 13, 2002, ... to 1,600-mm (64-in.) web width at a maximum 600 mpm (2,000 fpm) and up to 800-mm (32-in.) rewind diameters. The Titan SR7 will also feature an edge trim waste recovery system, separate shaftless unwind ...
- Wide Web Handling and the Problems It Can Bring
- (Magazine)
- November 30, 2001, ... during the past several years, so have casting machine windups. One problem that arises with wider rolls is deflection due to roll weight. Most wide casting machines wind the entire web, minus the trim, ...
- Products
- (Magazine)
- November 30, 2001, ... changeovers in less than 2 min. Outfitted with digital electronic controls said to provide accuracies within ±0.015 in. (±0.381 mm), eliminating the need to guillotine trim. Sheet squareness can be set ...
- Harmonic System Gets Tension Under Control
- (Magazine)
- October 31, 2001, ... with permanent magnet trim shaft motors that are rated to 2 hp. A remote-mounted control station allows Capital's press operators to preset and control web speed. Each station includes status indicators, ...
- What's New Product
- (Magazine)
- September 30, 2001, ... steel paper knives and three-knife trimmers. Co. adds that product does not involve a coating or surface treatment, and this is a totally new material for knives. Drying System Is Energy Efficient ...
- Slitting Adhesive-Coated, Low-Strength Films
- (Magazine)
- September 30, 2001, ... for good operability in a slitter. And, there is a significant caliper increase at the web edges, to the point where trim must be removed prior to rewinding. Because the adhesive presents a problem ...
- CPSC: The Other Packaging Regulatory Agency to Watch
- (Magazine)
- August 31, 2001, ... young children. The CPSC formally proposed a rule to require buckets to be redesigned but abandoned the rule when Congressional critics noted that the changes actually would be detrimental to the safety ...
- New Product Digest
- (Magazine)
- August 31, 2001, ... or “bleeding” air to the output to correct any error conditions. Features include auxiliary control valve capability for increased flow requirements; no trim pots or other analog set-up adjustments; microprocessor ...
- Slitter Savvy: Visual Roll Defects & Remedies
- (Magazine)
- July 31, 2001, ... retain cores and fasten webs securely to the cores. Trim wound in rolls: This is caused when the winder trim is not collected into the trim removal system and follows the web into the winding roll. ...
- Polymers/Laminations/Adhesives/Coatings/Extrusions
- (Magazine)
- July 31, 2001, ... therefore enhances the ability of the coating to stretch without detriment to the finished product. Achieving a 10 to 1 film stretch with this arrangement is possible. The technique has use where the lowest ...
- Products
- (Magazine)
- June 30, 2001, ... cut. Available in basic version 240 AS and in fully automatic versions 150A, 240A, and 550A. Offers quick size chanegovers; automatic waste trim selection; programmable cutting lengths and number of cuts; ...