Search

Winding: Part 3 - Tension, Nip and Torque

(Web Handling)

January 22, 2023, ... of six decreasing nip loads (20.3 Ú 0.7 pli) with three tension levels (0.32, 0.28 & 0.18 pli). Figure 3 summarizes this data using intrinsic units of pli. The three curves represent high, medium and ...

Winding Part 3: Tension, Nip and Torque

(Converting Expert)

January 16, 2023, ... units of pli. The three curves represent high, medium and low tension. Note the wide array of settings where the process can be configured. Tension and nip work together. Figure 3 WOT Graph Note: ...

NEW HIGH-INERTIA 1FK7-HI SERVOMOTORS ADDED TO SIEMENS OFFERING

(News | New Products)

December 31, 2020, Siemens Industry, Inc. has announced that it is expanding its popular 1FK7 servomotor family, with the introduction of a new high-inertia style. Siemens Industry, Inc. has announced that it is expanding ...

How Closed-Loop Integrated Motors are Meeting the Demand for Higher Acceleration Rates and Faster Machine Cycles

(Drives/Motors)

March 08, 2020, Step motors provide a low-cost and simple solution for high-resolution positioning in a variety of motion control applications By Eric Rice, Marketing Director at Applied Motion Products Step motors ...

Applied Motion Motors Meet High Standards

(Controls)

February 12, 2018, ... Machines, and Canadian CSA Standard C22.2 No. 100-14 for Motors and Generators. Company says customers are now assured that the company’s stepper and servo motors meet high quality standards for electrical ...

Dover Flexo Electronics Debuts Torque Controller

(News | New Products)

September 10, 2013, ... the highly precise transducer-based tension controllers for applications that may require less precision.  Unlike company’s tension controllers that take an input signal from tension transducers (load ...

Maxcess Introduces High-Efficiency Brake

(Controls)

April 22, 2012, The MAGPOWR HEB250 is a cost-effective, low profile pneumatic brake with a sleek design to maximize productivity OKLAHOMA CITY, OK | Maxcess announces the MAGPOWR HEB250, a high-efficiency pneumatic ...

Brake Handles More Torque

(Tension)

June 30, 2010, ... no maintenance. Reportedly, technology is ideal for tensioning or other power transmission applications. Also features polished seal surfaces, high-temperature materials, and rugged construction. MAGPOWR ...

A Torque Devil Is in the Details

(Web Lines)

September 30, 2009, ... up with in calculating high and low torque requirements. Let me know if you see anything wrong with this specification: Wanted | Center winder and unwinder Tension range | 0.5-3.0 lb/in. (6:1 range) ...

Top Packaging Producer is One of the First to Deploy Pioneering Tension-measurement Roller

(News | New Products)

April 24, 2023, In its quest to maintain the highest quality standards, a leading film and packaging manufacturer has turned to the world’s first segmented tension-measurement roller. In its quest to maintain the ...

Winding: Part 5

(Web Handling)

April 16, 2023, ... customer. Seven common defects will be presented here based on severity. Tacky webs tend to block. Narrow slits tend to dish. Slick webs tend to telescope. Larger rolls tend to be floppy. High loft webs ...

Winding Part 5: Solutions for Common Wound Roll Defects

(Converting Expert)

April 03, 2023, ... Seven common defects will be presented here based on severity. Tacky webs tend to block. Narrow slits tend to dish. Slick webs tend to telescope. Larger rolls tend to be floppy. High loft webs will experience ...

Unwind and Rewind Guides: Design and Installation Considerations

(White Paper)

March 21, 2023, ... to transmit power. Low cost actuators typically employ a simple lead screw mechanism with a metal or plastic nut. These actuators cannot provide high thrust or high dynamic response because of the nut ...

Winding: Part 4

(Web Handling)

March 05, 2023, ... retrieval in the future. Audit hoist practices. Never stand under a suspended load. Establish a safety zone around the perimeter where a coreshaft or finished roll will travel (Figure 1). Highlight ...

Dover Flexo Electronics – The Tension Control Specialists

(Equipment/Machines - Converting)

January 23, 2023, ... roll diameters, lengths and coatings are available by request. DFE also manufactures Model C cartridge-style tension transducers, considered to be the industry standard in high-sensitivity semiconductor ...

Winding: Part 2

(Roll Handling)

December 18, 2022, ... for compressible materials such as nonwovens, tissue and high loft webs. Although less sensitive, it is also a helpful metric for paper and film. You only need three parameters: Roll Diameter, Roll Length ...

Wound Roll Mechanics: Part 2

(News | New Products)

December 12, 2022, ... This is particularly true for compressible materials such as nonwovens, tissue and high loft webs. Although less sensitive, it is also a helpful metric for paper and film. You only need three parameters: ...

Wound Roll Mechanics: Part 1

(News | New Products)

October 02, 2022, ... will allow higher speeds. Surface winders are common for building large rolls. The addition of center wind assist allows lower nip load for delicate high loft webs. Two drum winders are common for high-speed ...

Wound Roll Mechanics: Part 1

(Converting Expert)

September 26, 2022, ... roll will allow higher speeds. Surface winders are common for building large rolls. The addition of center wind assist allows lower nip load for delicate high loft webs. Two drum winders are common for ...

Davis-Standard Introduces Next Generation Gear Reducer

(News | New Products)

May 31, 2022, ... gear reducers. The new reducer fulfills a variety of extrusion requirements, including those with high and low torque, speeds and extrusion pressures. It can also accommodate the DS Activ-Check™ system, ...