Search

A Communication from the PLACE Div. of TAPPI

(Magazine)

September 29, 2005, ... also a good design choice for nipping against rubber back-up rolls to keep the surface of the rubber cool. EXECUTIVE SUMMARY What Does Aluminum Foil Have To Do With Hot Tack In Packaging? by Gunter ...

New Products, Part 1

(Magazine)

September 29, 2005, ... at speeds to 500 fpm. Advanced features include a rolling nip splice head, simple nested vertical festoon, and microprocessor controls with adjustable tension control. Solid manufacture and simple mechanical ...

Mastering RFID, Part 2

(Archive)

September 29, 2005, ... and release liner. Ionizer 6 neutralizes the charge on the facestock with the inlays coming out off the nip after the vacuum applicator and cut-off unit. Ionizer 7 neutralizes the charge where the inlays ...

Without Boundaries

(Magazine)

August 30, 2005, ... and Faria explain, the films should not be stressed any more than necessary. Low-temperature adhesives were specified to minimize thermal expansion of the materials. Nip pressures were controlled accurately ...

The Converting Relay Race: Part II

(Magazine)

August 30, 2005, ... election. Surface unwinds eliminate the need for radial torque adjustments, but they are relatively rare due to their increased complexity and nip- related web defects. When inertial torque is more than ...

New Products

(Magazine)

June 29, 2005, ... Automatic, Middleborough, MA; 800/544-0070; butlerautomatic.com The 1000 Series splicer combines zero speed technology with 99.9% reliability, says company. Features include rolling nip splice head, simple ...

Heat Transfer Gets More Precise

(Magazine)

June 29, 2005, ... they go through a nipping process, Schulz says. "They want to minimize deflection. Customers trying to dial in their process closer and closer to be more precise, to minimize their downtime, make more and ...

18 Ways to Cut Coating Costs

(Magazine)

June 29, 2005, ... a major source of quality problems. These rolls are used in many places on the coater including tension nips or S-wraps, backing, and laminator pressure rolls. When these rolls get hard and shiny and slip, ...

A Communication from the PLACE Div. of TAPPI

(Magazine)

April 29, 2005, ... rolls are possible, the discussion covers five basic types to include crowned and concave idler rolls, grooved rolls that are either rigid or flexible, nip type, curved axis rolls and bars, and expanding ...

Get Out of the Scroll Business

(Magazine)

February 27, 2005, ... a nip or the flatness of a web span. If a product with poor green strength is transported over a small-radius roller too soon after laminating, the layers may slide and bond in the curved shape. Avoid ...

Why Tension?

(Magazine)

January 30, 2005, ... will mean breaks at lower tensions. Too little tension is more difficult to define; it varies by your process needs. If your web needs to go through nipped rollers or lie flat through slitting, you ...

New Product Digest, Part 2

(Magazine)

December 30, 2004, New products from: Black Clawson Machinery, Maxson Automatic Machinery, Praxair Surface Technologies, Latran Technologies, Unilux, Lumetrics, Catbridge Machinery, Nipson America, TruColor Vision Systems, ...

Who Likes Film?

(Magazine)

December 30, 2004, ... more diameter difference in rolls after slitting, causing problems with lock shaft and shared nip winding. Optimize tension, tension taper, and winding nip loads. Shorten roll length or increase cores ...

What's New in Narrow We

(Magazine)

September 29, 2004, ... Series printing press that has 41½2x faster correction rate and higher resolution; and a pneumatically controlled nip roll for the print station impression cylinders. Electronic Ordering Expanded Avery ...

Products, Part 2

(Magazine)

September 29, 2004, ... paper and films for wet glue labels and cigarette soft packs. Speeds are 200 mpm and 2,000 cuts/min. PFFC-ASAP 433 Nip Analysis Systems Is Dynamic Sensor Products, East Hanover, NJ, USA; 973/884-1755; ...

Battenfeld Gloucester Says MDO Provides Enhancements to PE; OEM Spotlights K Show Offerings

(Archive)

July 05, 2004, ... height increases the distance from the die to the nip centerline, which improves cooling and increases output. Its small size also means less heat builds up in the die. The low profile of the Optiflow ...

Products

(Magazine)

June 29, 2004, ... in this 150-in. face embosser comes up from the bottom, being preheated by radiant IR heaters (visible through the hole in the side frame). It then passes through the embossing nip to be processed, after ...

Safety in Converting: Part II

(Magazine)

May 31, 2004, ... on safety in the converting industry. It noted that safety concerns in the converting industry primarily are found in three areas: heat hazards, pinching nips, and housekeeping issues. The May column dealt ...

New Products for the Converting Industry, PFFC, June 2004

(Magazine)

May 30, 2004, ... Bubble Wrap into Pouches Ronipal, Tel Aviv, Israel; +972-3-649-9546; ronipal.com The Kangaroo automatic machine converts two- and three-layer bubble wrap into pouches. Pouch sizes run between 8 and 29 ...

Using a Chemical Primer for High Bonds & Low Oxygen Transmission

(Magazine)

April 30, 2004, ... include direct gravure with smoothing bar, reverse gravure, smooth roll with flooded nip and variable speed pick-up roll, and indirect (offset) gravure applicator with variable speed pick-up roll. The ...