Search

Blown Film: Measuring Melt Temps

(Controls)

February 28, 2010, ... from Penn State Univ. in 1979 and worked with film processors developing LLDPE films. He can be reached at 908-722-6000 ext. 2266; kellerr@bc-egan.com. The views and opinions expressed in Technical ...

Films 101: Back to Basics

(Archive)

November 30, 2009, ... Polyethylene LDPE | Low-Density Polyethylene LLDPE | Linear Low-Density Polyethylene LMWPE | Low Molecular Weight Polyethylene MMWPE | Medium Molecular Weight Polyethylene UHMWPE | Ultra High ...

Reclaim Plastics

(New Products)

November 30, 2009, ... ergonomically friendly cabinet design and other new features, including touchscreen controls. Designed for reclaiming LDPE, LLDPE, HDPE, and PP in both rolls and loose materials, system includes a roll ...

New Adhesive Achieves Cure, Regulatory Compliance in 3 Days

(Archive)

June 08, 2009, ...  A 48-ga PET/1 mil mLLDPE and a 60-ga Nylon/1 mil mLLDPE laminate have been manufactured with a conventional curing system and the new technology system. The laminated samples were shipped overnight to ...

Lean & Green

(Substrates)

May 31, 2009, ... | www.bemis.com Circle 305 or visit www.freeproductinfo.net/pff DOWLEX TG2085B LLDPE resin is engineered to optimize whiteness and thermal stability while offering improved resistance to phenolic pinking ...

Clariant Shifts Specialty Polymers Distribution to Masterbatches Division

(Archive)

October 31, 2007, ... powders include a variety of resins (LDPE,LLDPE, HDPE, EVA, PS, PP, PMMA, and CPET) and are marketed under the brand names Coathylene, Gotalene, Abcite, and Flamulit. Besides plastic-related applications ...

The place

(Magazine)

October 31, 2007, ... on the optical properties was confirmed. An optimal layer arrangement was found and applied in the co-extruded blown films with LLDPE, LDPE, and HDPE blends. A recommendation was presented on materials ...

FIRST GLANCE

(Flexpack)

September 30, 2007, ... needed. The lamination comprises (outer to inner) 48-ga polyster/48-ga metallized polyester/0.0015-in. LLDPE (this layer enhances puncture resistance and seal characteristics). The clear top polyester ...

the PLACE

(Magazine)

September 30, 2007, ... properties of linear low-density polyethylene (LLDPE) and how to use these benefits in extrusion coating. Compared with basic low-density polyethylene (LDPE), the linear type of polyethylene provides several ...

the PLACE

(Magazine)

July 31, 2007, ... the resin used as the primary component, i.e., LLDPE with LLDPE, LDPE with LDPE) does not appear to have a strong effect on film properties. The negative effect of calcium carbonate addition regardless ...

the PLACE

(Magazine)

May 31, 2007, ... while maintaining key physical properties of LLDPE. Compared with standard LLDPE, haze decreases by an average of 40% while gloss increases by 70%. This becomes comparable with the optics of LL/LDPE blends. ...

the PLACE

(Magazine)

April 30, 2007, ... lamination of a printed metallized polyester film to a LLDPE sealant layer. Laminated films are important in producing flexible packaging. The lamination after formation should remain adhered. When ...

the PLACE

(Magazine)

March 31, 2007, ... sealing layer had the lowest SIT, but lower hot tack than mLLDPE. mLLDPE exhibits superior sealing performance compared with conventional grades of PE. The composition of the core/middle layer of a sealant ...

the PLACE

(Magazine)

November 30, 2006, ... HMW-HDPE Film Structures With Improved Bubble Stability by Brian Wolfe, Equistar Chemicals APPLICATION: High ratios of LLDPE can change the molecular weight of HMW-HDPE resin to improve bubble stability ...

Wayne Machine Delivers New Extrusion Film Technology

(Archive)

November 05, 2006, ...  The line can process polyolefins such as LDPE, LLDPE, and HDPE; barrier materials such as EVOH; and adhesives for tie layer applications. It is said to be ideal for rapid development of multi-layer ...

What's Ne

(Magazine)

August 31, 2006, ... properties, increasing processing throughput, and reducing costs. Designed for extrusion applications, additive reportedly can be used to nucleate LLDPE resins and create a more efficient, easily handled ...

Dow Increases Prices

(Archive)

August 27, 2006, ... enhanced polyethylene resins, FLEXOMER very low density polyethylene (VLDPE) resins, TUFLIN linear low density polyethylene (LLDPE) resins, and UNIVAL high density polyethylene resins. See dow.com. ...

the PLACE

(Magazine)

July 31, 2006, ... architectures can be changed almost independently. Discoloration Resistant Polyolefins, Part IV: Gamma Irradiated LLDPE Films by R. E. King III, Ciba Specialty Chemicals APPLICATION: Gamma irradiated ...

New Products, Part 1

(Magazine)

May 30, 2006, ...  Control Taste and Odor Ampacet, Tarrytown, NY; 914/631-6600; ampacet.com Additive masterbatch 101787 removes taste- and odor-causing molecules in LDPE, LLDPE, and EVA films for use in food and ...

A Communication from the PLACE Div. of TAPPI

(Magazine)

May 30, 2006, ... LLDPE combined with a new high performance LDPE and a new HDPE in a coextruded blown film structure provides high performance in advertising display shrink film applications. Collation shrink describes ...