Search

Coating Line Added for Customer Use

(Coating/Laminating)

July 31, 2010, CHIPPEWA FALLS, WI | Premier Dies Corp. reports the purchase of a coating line from Coatema Coating Machinery to help its customers develop their slot CHIPPEWA FALLS, WI | Premier Dies Corp. reports the ...

Trends in technology

(Coating/Laminating)

April 30, 2010, ... solids coating so improved hardware can be designed and built. Methods of the future In regard to coating methods, slot die usage will increase and the use of roll coatings will decrease. The advantages ...

Pilot Coating: Coater Clone

(Coating/Laminating)

March 31, 2010, ... technology, we're able to get comparable quality off both!” Brady primarily uses the pilot line, which has a 24-ft oven, to test raw materials. Coating methods include slot die, forward and reverse gravure, ...

Web Lines: Your Guide to Web Guiding | Part 1

(Web Guiding)

February 28, 2010, ... they are not. If you want to see how good your tracking is, try to run a 61.5-in. web on your 62-in. rollers. I think you will find ±0.25 in. of clearance isn't enough. Equipment Slots The entrance ...

Technical Report: Thin Coating Challenges

(Coatings)

January 31, 2010, ... in which a defect-free product can be coated, and a range of variables, in which it functions effectively. Figure 1 is a typical window for the slot die coater. It shows the defect-free operating window ...

Engineer's Playgroun

(Coating/Laminating Main)

October 31, 2009, ... platforms to lay down both solvent- and water-based coatings. They include a slot die coater to apply 10-100 micron-thick wet water- or solvent-based films onto paper, plastic, or metal at up to 60 fpm; ...

Tollcoating.com Installs New Pilot Coating Equipment

(News | New Products)

October 06, 2009, ... before going into full production. Tollcoating.com now provides roll coating (one, two and three roll; forward and reverse), gravure, Mayer rod, polishing bar, and slot die coating to supplement its ...

New Roles for Converters

(Archive)

September 30, 2009, ... in one facility. The ability to use and manufacture flexible substrates permits non-planar product structures. The current coating application and printing processes — gravure, inkjet, slot dies, reverse ...

Carton & Box Reporter: April 2009

(Carton Box Main)

March 31, 2009, ... of boxes are analyzed at full production speed for slotting, gluing, and skewing problems. High-speed CCD camera technology and custom lighting produce more than 10,000 images/sec of the tab or fourth ...

What's New Products: March 200

(Magazine)

February 28, 2009, ... particleboard, plywood, or hardboard up to 2 in. thick with any variety of holes, slots, notches, and other precision cuts. Both standard and custom sleeve plugs are available. Badger Plug | 920-757-7300 ...

What's Ne

(Coating/Laminating)

January 31, 2009, ... controls, auto lift table, and multi-speed conveyor. ◆ Kompac Technologies | 908-534-8411 | www.kompactech.com PFFC-ASAP 320 Coat with Less Labor The MPUR Series hot melt slot coat applicators ...

What's New Product

(New Products)

November 30, 2008, ... | 815-654-4800 | www.martinautomatic.com PFFC-ASAP 418 Coat with Control Patch-coating versions of company's Liberty slot die systems apply coating materials intermittently at controlled intervals ...

Web Coating: Process Characterization

(Coating/Laminating)

October 31, 2008, ... on the substrate is another variable. Fundamental coater properties include drying air slot velocity and roll conditions as well as coating applicator conditions. These measurements should be stored ...

Pilot Coating Line Announced

(Coating/Laminating)

October 31, 2008, ... for low-cost, small-run, and experimental projects are offered by Tollcoating.com and include roll coating (one-, two-, and three-roll; forward and reverse), gravure, Mayer rod, polishing bar, and slot ...

Lab/Pilot/Technical Facilities Directory

(Archive)

October 31, 2008, ... St. North, St. Paul, MN 55112; 651-247-3364; tom.quinn@adherentlabs.com; www.adherentlabs.com Markets | beverages, industrial, medical/pharmaceutical, sanitary/disposables Coating | 1 hot melt slot ...

Coater Joins Tech Center

(News Clips Archive)

July 31, 2008, ... speeds. It has proven to be an alternative to slot-die coating in certain applications. The Process and Technology Center incorporates all well-known drying and curing technologies currently used in ...

EDI's New Tech Cente

(News | New Products)

February 04, 2008, Extrusion Dies Industries (EDI) has purchased an extensive manufacturing facility near its headquarters CHIPPEWA FALLS, WI | Extrusion Dies Industries (EDI) has purchased an extensive manufacturing facility ...

Accuracy for 3 Production Types

(News | New Products)

February 04, 2008, Bobst Group's high-performance Rapidset FFG includes a feeder, Rapidset flexo printers, slotter, rotary die-cutter, telescoptic transfer, PDC folder/gluer, and top counter ejector. ROSELAND, NJ | Bobst ...

Nukote Adds Pilot Coater

(News Clips Archive)

January 31, 2008, ... slot die, wire rod, gravure, or reverse roll coating methods. The coater features both oven drying and chill roll features with laminating capabilities. With the new line, the division now has six lines ...

Property Control

(Coating/Laminating)

January 31, 2008, ... varying coating process components have a wide range of shear rates: Dip coating shear rate is 10-100 sec-1, and slot die is 3,000-100,000 sec-1. Table I (see p36) gives additional shear rate values for ...