Cores

NimCor Roll Restorer Keeps Repair in Plant

(News | New Products)

April 29, 2012, Repair crushed or damaged cores on the plant floor with the Roll Restorer from NimCor   NASHUA, NH | The Roll Restorer from NimCor is a mobile tool that repairs damaged or crushed cores on the ...

NimCor Small Diameter Air Shafts Suit Narrow Web Applications

(News | New Products)

April 09, 2012, Custom-engineered air shafts for small diameter cores achieve critical performance for special converting applications. NASHUA, NH | NimCor's line of small diameter air shafts are claimed ideal for ...

drupa Preview | Exhibitors Launch New Products

(Carton Box)

March 08, 2012, ... system seals the tails of the rolls. Then the rolls are transported into the packaging unit. A core loader simultaneously charges the rewind shaft with new cores before the next winding cycle starts.   ...

Web Lines | Blocking in Rolls

(Web Handling)

January 12, 2012, ... foil in them). For nearly any wound roll, the highest average pressure will be at the core (especially when winding on hard plastic or metal cores) or in the layers immediately off the core. Across the ...

Web Handling | Russian Converter Growing Fast

(Flexography)

January 08, 2012, ... and the advantages offered by the Martin Automatic equipment in terms of reduced substrate waste on the roll cores. Expansion Leads to Relocation Less than two years of installation, with demand outstripping ...

Double H Plastics’ Cores Available in Reprocessed and Virgin HDPE

(News | New Products)

October 31, 2011, Double H Plastics now produces precision, extruded plastic cores in reprocessed as well as virgin HDPE. Sizes offered handle the full range of lengths to 84 in. WARMINSTER, PA | Double H Plastics now ...

Chucks Handle Large Cores

(Web Handling)

July 31, 2011, Air adapter chucks are designed to handle the largest cores without investing in new core shafts. Single and dual chucks are available to fit core diameters Air adapter chucks are designed to handle the ...

Recycle Cores for Many Materials

(Cores)

June 30, 2011, ... duty models offers blade-free roll slabbing and core recycling. Said to remove leftover roll material quickly, safely, and automatically so cores can be reused and scrap material recycled. Works with various ...

Technical Report: Up & Running

(Slit)

May 31, 2011, ...  Getting ready for a new cycle between sets (unloading finished rolls and re-loading cores) Setting up the slitter (knife changes) for a new job To speed up loading jumbos rolls, a growing number of ...

Counting Clicks

(Magazine)

February 28, 2011, ... Cores from Deforming Leaf air shafts reportedly provide the ideal support for thin wall cores of 1½ in. or larger to keep cores from deforming during winding. Trapper leaf shaft models are available ...

Plugs Help Prevent Crushed Cores

(Cores)

February 28, 2011, Heavy-duty core plugs are said to offer high strength to help prevent crushed cores on large rolls. Available in plastic, metal, and wood in sizes from Heavy-duty core plugs are said to offer high strength ...

Core Savings

(Winding Unwinding Rewinding)

December 31, 2010, ... Because cores often vary in thickness and thus in O.D., even by just a few thousandths of an inch, it is not atypical for the operator to set the splice diameter slightly higher than if the cores were ...

Winder Provides Fast Setups

(Winding Unwinding Rewinding)

December 31, 2010, ... to 31.5-in. dia on both shafts. Also will unwind, trim, and rewind to diameters exceeding the maximum capacity of standard duplex models. Auto core placement feature allows cores to be positioned precisely ...

Recycle Leftover Material

(Cores)

December 31, 2010, ... roll material quickly, safely, and automatically so cores can be reused. Appleton Mfg. Div. | 920-751-1555 | www.appletonmfg.com  ...

Cut Cores Cleanly

(Slit)

November 30, 2010, The A301 core cutter features a powered core pusher combined with a programmable PLC said to eliminate the need for full-time operator attention. Suited The A301 core cutter features a powered core pusher ...

Green Converting: Recycled Roll Coverings

(Web Handling)

November 30, 2010, ...  Matthew Menges is president of Menges Roller Co., Wauconda, IL, a roll covering and fabrication specialist manufacturing roller cores and coverings to 48-in. dia and 30 ft in length. Contact him at ...

Double Plugs Aid Stacking

(Web Handling)

November 30, 2010, ... speed stacking and palletizing of slit rolls, whether done manually or with robotic handling. Used in combination with divider sheets with pre-cut holes that align with slit roll cores, rounded plug bottoms ...

Cut Two Cores Quickly

(Cores)

October 31, 2010, Dual-mandrel core-cutting equipment cuts two core diameters quickly and safely with no tooling change, company reports. Said to increase efficiency, reduce Dual-mandrel core-cutting equipment cuts two ...

High & Mighty

(Flexpack)

September 02, 2010, ... plastic from reclaimed water, milk, and juice containers. Bags are available for both food and nonfood applications and may be ordered on coreless rolls, paper cores, or loose. The film and bags are triple-certified ...

Finish Many Types of Labels

(Die-Cutting)

August 31, 2010, ... digital die-cutting in any size or shape; waste matrix removal; slitting; and rewinding onto multiple 3-in.-O.D. cores. Company says QuadraCut technology allows virtually any size and shape of label to ...

Cut Cores Accurately

(Slit)

July 31, 2010, ... cut-off system said to make clean and accurate cuts with precision control. Reportedly able to handle a wide range of tough, plastic materials, cutter has options to cut both fiber and plastic cores on ...

PPI Offers NextLife Certified HDPE PCR Bags & Film

(Bag Pouch News)

July 28, 2010, ... standard and custom-sized bags. Bags are available for both food and non-food applications and may be ordered on coreless rolls, paper cores or loose. According to Phil Rapp, NextLife Packaging COO, ...

Finzer Roller, Imperial Rubber Products Announce Alliance

(Web Handling)

July 01, 2010, ... Roller, a leading one-stop resource for rubber rollers and specialty coatings, including steel roller cores, replacement rubber coverings and peripheral products, have announced  they have entered ...

Web Lines: Are You Getting the Shaft?

(Winding Unwinding Rewinding)

June 30, 2010, ... the Shaft These are the advantages of shafted winding and the disadvantages of shaftless winding. Due to the structural support of the shaft, shafted rewinds can use thinner, less expensive cores and ...

Control Tension Precisely

(Tension)

May 31, 2010, The X-3400 rewind tension controller works to control the slippage of differential winding shafts and controls the torque transferred to the cores. The The X-3400 rewind tension controller works to control ...

Allying to Supply Stretch Film Systems

(Web Handling)

May 31, 2010, ... waste, and costs,” explaining that eliminating cores can save money, and coreless wound rolls are smaller in size for the same amount of film, making them easier to handle and cheaper to transport. ...

Slit Difficult Materials

(Slit)

May 31, 2010, ... turret is said to be flawless in its execution of the cut and transfer, from finished rolls to new cores, without glue or tape. The machines are intuitive, meaning training and operator skills required ...

Cut Cores Efficiently

(Slit)

May 31, 2010, Automation upgrades provide efficient core cutting without the expense of replacing an existing cutter. Solutions include automatic core loading, core Automation upgrades provide efficient core cutting ...

Change Slitter Rolls Quickly

(Slit)

May 31, 2010, The Conslit slitter/rewinder allows the web to be cut independently of selected rewind direction with X-Cut and spliced to new cores. Offers quick and The Conslit slitter/rewinder allows the web to be ...

Get Clean Core Cuts

(New Products)

April 30, 2010, The S210 fixed-knife core cutter is designed to produce clean, burnished cuts at precise lengths. Provides companies with quality cores cut in-house and The S210 fixed-knife core cutter is designed to ...