Search
- FTA Gets Flexo Engines Started at Forum/Info*Flex
- (Flexography)
- May 31, 2011, ... your ink is important to achieve correct color. Use the right tools to control the pH, temperature, and viscosity, and keep the tools clean and calibrated. Dedman says it's critical to always adjust pH ...
- FTA Gets Flexo Engines Started at Forum/Info*Flex
- (Flexography)
- May 03, 2011, ... of your ink is important to achieve correct color. Use the right tools to control the pH, temperature, and viscosity, and keep the tools clean and calibrated. Dedman says it’s critical to always adjust ...
- Roll Finishing-Cut & Sand
- (Winding Unwinding Rewinding)
- April 30, 2011, ... temperature of 85 deg. Together, the robot and sensor make this finishing task possible. The system uses ABB's force control package featuring the Force/Torque Sensors integrated onto the robot wrist ...
- Coating Matters: Steam-The Cure for Curl
- (Surface Prep)
- March 31, 2011, ... absorbed by the web is dependent upon the temperature of the web entering the steam applicator (ambient to 125 deg F), the density of the steam, and the time it is in contact with the web (dwell time). ...
- Counting Clicks
- (Magazine)
- February 28, 2011, ... long lifetime; and improved yield. The cutting edge is chemically stable, which is said to prevent any materials from adhering to blade. The blades can be used at temperatures up to approximately 1,070 ...
- Rheometer Now Features USB Connectivity
- (Controls News)
- December 22, 2010, ... the marketplace today, allowing the operator to easily predict a material’s complete flow behavior. In stand-alone mode the operator enters test parameters, temperature control requirements, starts ...
- Process Troubleshooting
- (Coating/Laminating)
- October 31, 2010, ... The issues (typically downweb in form) include contamination, air entrapment, and temperature control. Substrate and substrate delivery: In substrate delivery, the equipment variables to be monitored ...
- Coating Tech Service Presents at AIMCAL Fall Tech Conference
- (Coating/Laminating News)
- October 13, 2010, ... in all layers of the final product to equilibrium. Coated or laminated paper processes typically require high temperature curing which creates moisture imbalances between the paper substrate and the coating ...
- Pilot Coaters: Small Volume, Big Advances
- (Coating/Laminating)
- September 30, 2010, ... ±0.2% Low solution volume Programmable thickness in cc/cm2, cc/m2, cc/ft2, mg/ft2, mg/m2 Programmable temperature (independent controls for die and pump) Maximum coated area of 2,910 cm2 for 27.9-cm ...
- Cure, Shrink With Many Features
- (Coating/Laminating)
- September 30, 2010, ... thermocouple jack panel through the oven wall, digital indicating temperature controller, manual reset excess temperature controller with separate contactors, and recirculating blower airflow safety switch. ...
- Davis-Standard Introduces New Coater at Labelexpo America
- (Coating/Laminating)
- September 05, 2010, ... temperature controls and enhanced gauge control based on the age of the existing gauge system. The Integrator Pro combines line control and data monitoring into one highly functional information center. ...
- Web Lines: Mission-Detect Nip Variations
- (First Glance)
- August 31, 2010, ... uniform webs and coatings without temperature variations. However, the perfect nip is a rarity. All efforts for uniform nipping are threatened by diameter variations from wear or poor machining, deflection ...
- Plastics Recycling: Reclaim & Reuse
- (Coating/Laminating)
- August 31, 2010, ... to the extruder screw. Compression and melting occur gradually, at a precisely controlled temperature, adding minimal heat history to the reclaim, which significantly contributes to the quality of the ...
- Medical Packaging: How To Avoid Public FDA Criticisms
- (News | New Products)
- June 24, 2010, A ten-step technical guide, “How to Avoid and Respond to Public FDA Criticisms—Form 483 Letters—for Temperature, Humidity and other Controlled Environments” is now available from Veriteq A ten-step technical ...
- Blade Coatings: Prolong Blade Life
- (Slit)
- May 31, 2010, ... building the final result and providing greater control over thickness and uniformity. The processes and equipment used allow the blades to be coated at temperatures less than 250 deg, in many applications, ...
- Trends in technology
- (Coating/Laminating)
- April 30, 2010, ... energy by minimizing time and temperature of mixing. Reduce solution delivery system energy by holding solution at low temperature and heat immediately prior to coating application. Recycle all scrap ...
- High Cooling Power Is Available
- (New Products)
- April 30, 2010, ... water to cool one side of the heat exchanger while de-ionized water (or a coolant of choice) on the second side is used to cool the application. The application loop is temperature controlled to better ...
- Techniques to Prevent/Minimize Die Lines
- (Tom’s Poly Ploys)
- April 28, 2010, ... die design varies between processes, the extrusion process is universal. If the temperature the polymer is exposed to is too hot, the rate of polymer degradation will accelerate. If the polymer is exposed ...
- Narrow Web's Leverag
- (Label/Tape)
- March 31, 2010, ... of these materials will cause the print surface to see temperatures up to 375 deg F. Therefore, inks and varnishes must be able to withstand these temperatures. Varnishes for the food market must meet ...
- Multipack Juices It Up
- (Metallizing)
- March 31, 2010, ... step toward a fully compostable package. Bryce adjusted printing inks along with web tensions, process temperatures, and bonding processes to deliver a lamination that would provide adequate snack food ...