Search
- About Cold Seal Adhesives
- (Magazine)
- December 30, 2005, ... natural rubber latex, which is the predominant ingredient. Manufacturers of cold seal adhesives may add tackifying resins, plasticizers, extenders, or other ingredients. When added to the natural rubber ...
- Mountain Valley Adds Recycling Capacity
- (Archive)
- December 14, 2005, ... nearly every state and province throughout North America. Mountain Valley recycles the recovered films and manufacturers 100% post-consumer recycled (PCR) resins in both densified and pelletized forms, ...
- A Communication from the PLACE Div. of TAPPI
- (Magazine)
- October 30, 2005, ... The new film in this paper is a coextrusion based on three polyethylene resins. They provide the necessary optics, toughness, and stiffness to excel in collation shrink. The technology is not a singular ...
- An Exercise in Compliance
- (Magazine)
- September 29, 2005, ... help. The materials coming into the plant will consist of all the adhesives, coatings, primers, inks, solvents, resins, substrates, etc. Such an inventory must include everything. If an operation ...
- A Communication from the PLACE Div. of TAPPI
- (Magazine)
- September 29, 2005, ... data. Because of the varied resins run on a single extruder in many extrusion coating operations, the screw is frequently run under conditions far from its original optimum design point. To compensate ...
- Hurricanes Impact Whole Nation
- (Magazine)
- September 29, 2005, ... And what about the materials that comprise the products themselves? Price increases for resins, coatings, and films having oil-based components started long before the hurricanes hit. These recent weather-related ...
- Extrusion Coating Evolves
- (Magazine)
- August 30, 2005, ... in web widths and speeds, resulting in new resins and high-efficiency coating groups. “A lot of old machines are actually under modification with the addition of coextruders to increase production and ...
- A Communication from the PLACE Div. of TAPPI
- (Magazine)
- August 30, 2005, ... converters to produce aluminum based peel lids by extrusion coating of a single layer. The heat seal/peel resins introduced more than ten years ago replaced the partially seal/peel lacquers widely used ...
- A Communication from the PLACE Div. of TAPPI
- (Flexpack)
- June 29, 2005, ... packaging industries… EXECUTIVE SUMMARY Lidding Applications For Peelable Seal Roll Applied Coatings by Thomas R. Mueller, Rohm and Haas Company Application: Although extrudable resins and coextruded ...
- One Stop Shop
- (Flexpack)
- May 30, 2005, ... to flexible packaging, the company manufactures high quality PET chips/resins; biaxially oriented polyester films; biaxially oriented polypropylene (BOPP) films; cast PP films in plain, chemically coated, ...
- Odor & Exempt Solvents
- (Magazine)
- May 30, 2005, ... for many ink resins and has an evaporation rate in the range of toluene and methyl ethyl ketone. Low-VOC coatings using TBAc have been formulated for applications including urethane automotive refinishing ...
- A Communication from the PLACE Div. of TAPPI
- (Magazine)
- May 30, 2005, ... influence the strength or adherence of the weak bonds. Laboratory results showed that low vinyl acetate content resins seemed to deliver a similar balance of compatibility and dispersability compared with ...
- Truth or Myth?
- (Magazine)
- May 30, 2005, ... by using the correct polymers, resins, waxes, and additives. They attempt to formulate low, medium, and high slide angle coatings. Truth. We tested the slide angle of board coated with different commercial ...
- Materials
- (Magazine)
- April 29, 2005, ... in the liquid state. Can be used effectively as a stir-in additive to water-based adhesives, coatings, inks, resins, and more. Allows for rapid static dissipation in machine as well as a certain level ...
- A Look at Laminating Inks
- (Magazine)
- April 29, 2005, ... Abrasion requires the use of PE waxes, fluorocarbons, silicones, or other lubricants to control resistance to packaging physical abuse. Water resistance typically requires careful selection of resins that ...
- Converting Industry News, Part 1
- (Magazine)
- March 30, 2005, ... adds. Commodity plastic demand in the manufacture of medical product components and packaging is expected to account for 83% of all medical plastics. Leading commodity resins include PVC, PP, PE, and PS. ...
- CMM 2005 Exhibitors Listed by Product Categories Continued
- (Archive)
- February 27, 2005, ... 4325 RESINS DKSH North America, 4633 Dyna-Tech Adhesives & Coatings, 216 Polyonics, 5011 ROLL CLEANING Absolutely MicroClean, 4021 BST Pro Mark, 4248 Doyle Systems, 4468 Flexo Wash, ...
- UV/EB a Bright Spot in Economy
- (Magazine)
- February 27, 2005, ... be reduced with the use of "photo-sensitized" resins and oligomers that can absorb the UV energy and catalyze the photo polymerization. Today, many printers are not interested in new products unless ...
- New Products
- (Magazine)
- February 27, 2005, ... line is available with web edge encapsulation system. A deckling system for the sheet die allows for encapsulation of the web edges, reportedly allowing production using inexpensive resins. After cutting, ...
- Converting Industry News, Part 2
- (Magazine)
- January 30, 2005, ... by the oil price, and styrene costs are affecting the cost of acrylic resins," says Leif Svensson, corporate purchasing director of ANI. "The acrylic acid situation throws everything on the binder side ...