Search
- Products
- (Magazine)
- April 30, 2001, ... COFs and no odor; and instantly cured adhesive (laminating and p-s adhesives) with no VOCs or extractables. Co. reports system operates at high press speeds (over 1,000 fpm) and is energy-efficient. ...
- Converting Industry News
- (Magazine)
- April 29, 2001, ... shelf life, the mfr. says. The substrate is engineered with a variety of barriers and laminations that provide strength as well as protection from odor, moisture, grease, and other contaminants. The ...
- Narrow Web New Products
- (Tapes)
- March 31, 2001, New products from: Avery Dennison, Chestnut Engineering, FLEXcon, RPEL USA, and Telstar Engineering. Machinery, Accessories, Services, Materials Film Suited for Clear Gel-Stick Deodorant Packaging ...
- Wide vs Narrow Web FlexoIt's More Than Just the Widt
- (Magazine)
- February 28, 2001, ... rolls. However, the use of slower solvents in narrow web inks increases the potential for solvent retention and product odor. The ink formulator must carefully balance the ink's drying rate to keep the ...
- Small Inspection Light Proves to Be a Shining Star
- (Magazine)
- February 28, 2001, ... Amgraph was an early user of 100% water-based inks and 100% solid-cured inks and adhesives. The company likes the environmental benefits these products offer, as well as the fact that they reduce odors ...
- Specially Designed Metallocene Copolymers for Extrusion Coating
- (Magazine)
- February 28, 2001, ... show that the POP had better results than all polymers except LLDPE. POP had the highest hot tack when sealing through flour contamination. POP also imparts the least amount of off-flavor and off-odor ...
- Materials
- (Magazine)
- January 31, 2001, New materials from: Adhesives Research, Avery Dennison (Fasson), Craig Adhesives & Coatings, Emtech, FLEXcon, GE Silicones, National Starch & Chemical, Northwest Coatings Corp., and Spartan Adhesives ...
- What's New in Narrow We
- (Magazine)
- December 30, 2000, New from: A.B. Dick, ADI Intl., Conversource, Flexo Concepts, Labelmate LLC, Mark Andy/Comco Intl., Matik North America, Northwest Coatings Corp., Propheteer Intl., Sato America Inc., Sony Chemicals Corp. ...
- The Case Against Oxidation as a Primary Factor for Bonding Acid Copolymers to Foil
- (Magazine)
- November 30, 2000, ... odor, processing, and other problems associated with high temperature processing. Email Barry A. Morris at This email address is being protected from spambots. You need JavaScript enabled to view it. Application: Acid copolymers will generally adhere more strongly ...
- Temperature Switchable Membranes for Packaging Fresh Produce
- (Magazine)
- October 31, 2000, ... dioxide. This will cause off odors and off flavors. Using SCC polymers as the coating on a membrane will provide a rapid increase in permeability as the temperature increases. Conclusion Membranes ...
- Assessing Real-Life Sealant Performance in Flexible Packaging
- (Magazine)
- September 30, 2000, ... desirable performance benefits when used in mono-layer or multi-layer packaging films—outstanding sealability, excellent optics, low extractables, minimal contribution to off-taste and off-odor, high impact ...
- What Is the Role of Additives in Water-Based Inks?
- (Magazine)
- August 31, 2000, ... ink adhesion, can be exotic reactive materials or simple solvents. They can provide excellent adhesion characteristics, but they must be controlled carefully to prevent undesirable effects, such as odor ...
- Innovation Drives Converter of Pressure-Sensitive Labels
- (Magazine)
- June 30, 2000, ... at that time Productos Codorniu y Garriga S.A.], which had been established in 1910." Today, with Spain in the European Union and the euro around the corner, market conditions are radically different. ...
- Flexible Packaging Strategies for 2002: In Summary
- (Magazine)
- March 31, 2000, ... and coextrusions are used. Usually referred to as agchem, the agricultural chemical industry is growing at 4%. The use of high-barrier, reclosable, plastic pouches (including standup) for odor control, ...
- Getting the most value from your extrusion coater.
- (Magazine)
- November 30, 1996, ... temperature reduction may be only a few degrees, even a small reduction has positive results, such as reduced odor, in the finished product. Using ozone to boost bonds has an additional benefit, because ...
- The role of barrier materials in packaging low-fat goods.
- (Magazine)
- October 31, 1996, ... content can produce off-odors and off-flavors. A study examines the problem and evaluates which barrier materials can overcome the problem. The array of low-fat/no-fat food products is steadily increasing ...
- Popcorn packaging leads converter down new paths.
- (Magazine)
- October 31, 1996, ... Phoenix uses water-based inks and adhesives, the potential for any odor issues with the product is reduced. Variations in paper types and calipers are possible, as well as different metallized OPP films. ...
- Partnering launches future growth in laminations
- (Magazine)
- August 31, 1996, ... Massachusetts, to achieve proprietary colorant systems for our requirements." Other advantages to using 100% solids adhesives are the lack of odor and reduced scrap - both of which have a positive impact ...
- Laminator adds metallizing to the mix
- (Magazine)
- August 31, 1996, ... customer a good surface to print on, so we use water-based," says Goldman. Another reason is that odor levels are kept down. Being smaller is not a disadvantage in Goldman's eyes. "We can make overnight ...
- UV/EB technology moves ahead with the times
- (Magazine)
- June 30, 1996, ... the crosslinking of film for higher performance. Other advantages of EB technology are said to be consistency, degree of cure, low odor, and low downtime. Unfortunately, EB is quite a bit more expensive ...