Adhesives

Aqueous adhesive systems: giving credit where it is due.

Published: August 01, 1996, By Bentley, David J., Jr.

The Div. of the History of Chemistry and the Office of Public Outreach of the American Chemical Society recently designated Kem-Tone wall paint as a National

UV/EB technology moves ahead with the times

Published: July 01, 1996, By Mykytiuk, Andrew

Converters have been fueling the growth of the ultraviolet-curing industry at a rate of 20% per year for the past ten years. George Pasternack, manager

The challenge of formulating FDA compliance.

Published: May 01, 1996, By Bentley, David J., Jr.

Many application of adhesives, coatings, and inks for flexible packaging and other uses require compliance with regulations of the Food and Drug Administration

Water-based adhesives meet just-in-time demands.

Published: April 01, 1996, By Rolando, Thomas E.; Voss, Peter A.

High-performance, water-based adhesives cure in 24 to 48 hours, giving converters a competitive edge with their customers.In this era of just-in-time

Pay attention to flash points, and you won't get burned

Published: April 01, 1996, By Bentley, David J.

The flash point of a flammable liquid is the lowest temperature at which vapors above that liquid will burn when exposed to a source of ignition. There

For adhesives or coatings, ask the right questions

Published: March 01, 1996, By Bentley, David J., Jr.

An attendee at a recent technical conference was bemoaning the fact that adhesive suppliers did not help their customers as requested. The specific complaint

Regulation, competition drive the adhesives industry

Published: February 01, 1996, By Mykytiuk, Andrew

Perhaps the biggest reason for the rapid change in the adhesives business is the Environmental Protection Agency's push to eliminate volatile organic

KAPCO hits grand slam in pursuing custom markets

Published: December 01, 1995, By Simonsis, Yolanda

Baseball player Joe Carter invents a converted product that now replaces what for generations has been a down-and-dirty - but mostly sticky - situation.

Hot melt applications continue to grow

Published: July 01, 1995, By Mykytiuk, Andrew R.

Because our industry is dynamic and in a constant state of flux, how well and how quickly organizations adapt to change is more than a choice; it is a

Two-component adhesive system eliminates mixups

Published: July 01, 1995, By Simonsis, Yolanda

Minneapolis-based CSD/WestPac Division solves unpredictable moisture-curing problems by switching to a two-component laminating adhesive that allows total

Company develops line of cost-saving packaging

Published: April 01, 1995

A Pennsylvania packager responds to the diaper industry's growing demands for high-performance compression diaper bags. These bags, which are tightly

Start
Prev
1
2
3
4
5
6
7
8
Next
End

E-Newsletter

Digital Magazine

Contract Services

Industry Links