News | New Products

Directories | Reports

White Papers

PFFC brings you exclusive White Papers from our online sponsors.

Blogs

Visit Kelly on Static from Static control expert Dr. Kelly Robinson, president of Electrostatic Answers; Kelly has 27+ years of experience in problem-solving and consulting.

Visit Tim's Web Lines to handle and wind your paper, film, foil, and similar products. Take advantage of Tim’s 25+ years just like over 100 converters have.


Visit Mark's Coating Matters from fluid coating expert Mark D. Miller; Process improvement and project management for precision roll-to-roll coating applications.

Visit Marketing Mojo for dynamic marketing insights from Stephanie Millman that inspire new ideas on how to stay on top of your customer’s mind.


Visit Yo’s Yarns to share the thoughts, impressions, experiences, and news that impact the converting industry. . . or anything else that happens to be on her mind!

Visit Tom's Poly Ploys, where Tom will be writing on various topics that the typical polymer processor would encounter on the job.


Winding Technology | Now Directly in the Drive

Siemens WindingWinding and unwinding paper and foil is, at first glance, just an inconspicuous part of many industrial production processes. However, when looking at the process in greater detail, it becomes apparent that this step is extremely important in determining product quality. It is precisely for this reason that winding and unwinding must be handled with consideration given to the speed of the winder, the control processing times, and also the implementation of that control scheme into the overall machine design to achieve greater efficiency.

Electronically controlled AC drives offer an extremely efficient means of executing the widest range of winding tasks. Today, these drives are an integral part of most modern production equipment and systems, so the question arises: Why not use the configuring/engineering tools already available to implement winder tasks? Engineers asked themselves precisely the same question— and the answer was a standard "winder" application that has been designed into the current generation of Sinamics S120 drives. This standard application can be used to quickly and flexibly address demanding tasks on a new design or retrofit of a printing press, converting machine, packaging line, or other processing line.

Implementing the winder application directly into the drive system has a basic advantage when compared to an external controller; namely, it relieves the higher-level, open-loop control of arithmetic tasks. As a consequence, engineering resources are available for other tasks. Additionally, a control system with a lower performance and price point can be used. In any case, a high proportion of the communication load between the control system and the drive is eliminated. As a result, the associated faster response and cycle times can be more quickly and precisely realized in an open-loop control or closed-loop control, which increases the productivity and/or the winding quality, depending on the particular application.

Winding with or without tension sensors

A winder solution generally comprises a winder drive and web and tension sensors. The task is to wind or unwind the web with a defined tension, whereby the roll diameter continually changes. The electronic drive system calculates the actual diameter using several system variables to control the motor speed and keep the tension of the material web constant. To achieve this, the velocity of the web and the winder shaft speed must be known at all times. If the highest quality tension regulation is needed, severe demands are placed on the performance and tension precision, so it makes sense to use additional sensors—for instance, dancer position control or load cells.

The standard application described here is designed for common center winders with a central shaft to drive the roll. From a control perspective, this is more challenging than a surface winder, but is the more effective of the two, as it is a much simpler version, at least from a mechanical perspective.

The standard application supports various control techniques, including open-loop torque control, direct tension control with dancer position control and speed correction, as well as tension force control with torque limiting—respectively with speed correction (see Closed-Loop Control Technique below). This means that the standard application addresses approximately 90% of all winder applications found in the industry today.

Siemens Illustration 1The standard winder application allows various winding tasks to be quickly implement, with or without tension sensors.

The recently developed Drive Control Chart (DCC) forms the basis for the standard application. This is a module of the graphic drive engineering tool “Starter,” found on the Sinamics S120 family. Based on the available information, drive specialists have formulated a DCC for winder applications. Using this programming language, relevant, multi-instance capable function blocks can be easily interlinked by simply dragging them from a standard library and dropping them into the chart. Users need only to parameterize the specific units, such as the material velocity and acceleration, then define the closed-loop control technique. This standard application then calculates all the signals required to control the winder axis, such as speed, torque, and torque limits, then integrates the specific winder functions required for the job.

Siemens Illustration 2Function blocks interlinked by dragging and dropping them, shown here for the diametr calculation, can be simply parameterized and also modified by the user for specific tasks.

 

 

 

 

 

 

 

 

 

 

Diameter calculator

This function is used to convert the web velocity into the corresponding motor speed. The actual diameter is obtained from the ratio of the web setpoint velocity to actual speed.

Taper tension characteristic

This is used if the material tension should decrease as the diameter of the roll being wound increases. The taper tension characteristic is dependent on the actual diameter of the roll.

Controller adaptation

Using this function, the tension controller gain can be adapted as a function of the diameter, plus the gain of the speed controller in the drive can be adapted as a function in moment of inertia on the roll being wound. This means even large build-up ratios can be easily accommodated.

Acceleration feed-forward

Quickly responding to velocity changes, a compensation torque can be switched to the drive while accelerating and decelerating the material. This compensation torque comprises the variable and constant moments of inertia. This prevents tension dips or excessive tension when the velocity changes. Acceleration feed-forward is usually required for open-loop tension control, but also for tension control using a load cell.

 

Criteria for Selecting a Suitable Control Concept

Control concept Open-loop tension control Direct tension control with dancer position control via speed correction Direct tension control with load cell via torque limits Direct tension control with load cell and speed correction
Information regarding tension actual value sensing No tension actual value sensing required Intervenes in the material web routing; material can be stored Sensitive to overload; does not intervene in the web routing Sensitive to overload; does not intervene in the web routing
Roll ratio Dmax/Dcore Up to approx. 10:1, good dv/dt compensation and friction required From experience, up to approx. 15:1 From experience, up to approx. 15:1, precise dv/dt compensation required From experience, up to approx. 15:1, precise dv/dt compensation required
Tension range Zmax/Zmin Up to approx. 6:1 for good compensation of friction and dv/dt Can only be changed for adjustable dancer roll support Up to approx. 20:1 for precise dv/dt compensation Up to approx. 20:1 for precise dv/dt compensation
Roll ratio, tension range Dmax/Dcore X Zmax/Zmin Generally, up to 40:1 Depends strongly on the version of the dancer roll support, up to approx. 40:1 Up to 100:1, significantly depends on the tension actual value signal Up to 100:1, significantly depends on the tension actual value signal
Web velocity Up to 600 m/min for good compensation Up to over 2,000 m/min Up to 2,000 m/min for precise dv/dt compensation Up to over 2,000 m/min
Control concept preferred when processing... Sheet steel, textiles, paper Rubber, cable, wire, textile, foil, paper Paper, thin foils Elastic materials

 

Closed-loop control technique—when high precision is a must

Various tension control techniques are the core of this standard winder application. Open-loop tension control is commonplace today, because sensors are not required. This mode of operation is as follows: The tension setpoint is multiplied by the actual radius of the roll being wound and the result is directly input as torque limit value. This means the motor torque linearly increases as the diameter increases, and the tension is kept constant by saturating the speed controller. An important factor with open-loop control is the precise compensation of the friction and acceleration torques, so the feed-forward torque setpoint comes as close as possible to the required material tension.

open-loop tension control

Siemens Indirect Tension ControlFor tension control with dancer roll and speed correction, the web is routed over a dancer roll. The dancer roll attempts to deflect the material with a defined force. This deflection (dancer roll position) is detected using an analog sensor or encoder. The dancer roll position controller, in tandem with the drive speed controller, corrects the position actual value of the dancer roll to track the position setpoint (for example, the dancer roll center position). To do this, the position controller enters a velocity correction setpoint into the speed controller. When dancer rolls with pneumatic loading are used, dancer tension can be regulated via the taper tension characteristic feature. The dancer roll can simultaneously serve as a storage area (buffer) for the web and it also provides a damping action, for instance, on “out of round” material rolls, on layer jumps (when winding cables), or when changing rolls.

Dancer position control

Siemens Dancer Position controlFor the closed-loop tension control with load cell using torque limits, the material tension is directly sensed using the tension transducer and is appropriately controlled. Similar to the open-loop tension control, the speed controller in the drive operates in a saturated state, meaning that the drive is at one of the two torque limits and is controlled using these limits. The correction value from the tension controller acts on these torque limits. In addition, using setpoints from the acceleration feed-forward, the taper tension characteristic and the friction characteristic are connected to the torque limits. This taper tension function can be used to change the dancer force.

Tension control with load cell

Siemens Tension Force ControlAlso, for tension control with load cell and speed correction, the tension is detected using a load cell and is fed to the tension controller as actual value. However, in this case, the tension controller output acts as a velocity correction value on the speed controller. Accelerating torque, friction torque, and tension force are supplied as a feed-forward.

Friction compensation

Friction losses can be simply compensated using a function with ten interpolation points. These are determined when commissioning the system. On a Siemens Sinamics S120 drive, for example, there is an option for automatically recording these points.

Jogging

In the jog mode, either a path velocity setpoint can be directly entered via the interface or one of two fixed jog setpoints can be selected.

Web break detection

The web break detection is active when the tension control is switched on, and depending on the control type, is configured in various ways. After a web break, the diameter computer is stopped, tension operation is disabled, and the tension controller enable is withdrawn.

With the functions listed above, all the necessary resources are available to efficiently implement individual winding applications within a machine’s drive system, all in a form that is relatively simple to learn. As a result, even entry-level personnel can generate central winders for demanding solutions without knowing the actual technology in great detail. Users already experienced in handling such engineering tools can also modify the program, on which the standard application is based, as required. This allows them to customize very specific winding applications directly into the drive to suit most any commercial machine.

About the authors

Alexander Schaedlich is an application engineer at Siemens AG, Drive Technologies—Motion Control

William Gilbert is industry business development manager, converting, at Siemens Industry Inc., Drive Technologies—Motion Control

CONTACT COMPANY


You need Flash player 6+ and JavaScript enabled to view this video.
Evergreen Packaging Testimonial (0:03:44)

Message Board