Shafts
- Zero-Max Couplings Meet Demanding Needs
- (News | New Products)
- April 20, 2012, ... means a smaller machine footprint. Designed with improved clamp-style hubs for handling larger shafts and higher torque, shafts are said to have increased clamping strength, eliminating the need for ...
- Amacoil Drive Nut Offers Backlash-Free Linear Motion
- (Controls)
- January 24, 2012, The Amacoil-Uhing Model RS4 drive nut allows users to change drive nut linear pitch without replacing shafts or adjusting controls ASTON, PA | Amacoil offers the Amacoil-Uhing Model RS4 drive nut ...
- Slitting/Rewinding | Arkwright Improves Output with Shaft Upgrade
- (Slit)
- January 17, 2012, Coating converter sees significant productivity gains with Goldenrod differential shafts. Arkwright Advanced Coating Inc. of Coventry, RI, has realized significant productivity gains after incorporating ...
- CTC Offers Smaller Version of Clamshell Splicer
- (News | New Products)
- December 05, 2011, ... it can accommodate two full 14-in.-dia rolls. The clamshell splicer mechanism opens 90 deg into a horizontal plane, providing a flat work table on which to easier prep the splice. The two unwind shafts ...
- CTC Intl. Rewinder Finishes Small Roll Labels
- (News | New Products)
- November 07, 2011, The Model STACRW2-6 automatic turret rewinder from CTC Intl. is said to have everything needed to automatically finish small roll labels without additional unwinding equipment. WEST CALDWELL, NJ | ...
- Chucks Handle Large Cores
- (Web Handling)
- July 31, 2011, Air adapter chucks are designed to handle the largest cores without investing in new core shafts. Single and dual chucks are available to fit core diameters Air adapter chucks are designed to handle the ...
- Flexible Slitter Has Short Web Path
- (Slit)
- May 31, 2011, ... to entering slitting section; cantilevered air differential shafts with choice of direct friction or internal slip designs; and razor or shear slitting. Parkinson Technologies | 401-762-2100 | www.parkinsontechnologies.com ...
- Tension Control for Slitters
- (Slit)
- April 30, 2011, ... These values are subsequently compared through special software to pre-set targets, and deviations are corrected through changes in the pressure inside the rewind shafts. Handles a wide variety of materials ...
- Counting Clicks
- (Magazine)
- February 28, 2011, ... Cores from Deforming Leaf air shafts reportedly provide the ideal support for thin wall cores of 1½ in. or larger to keep cores from deforming during winding. Trapper leaf shaft models are available ...
- Chucks Offered in Several Versions
- (Web Handling)
- January 31, 2011, ... skew, lateral, and skew and lateral (combined) adjustments. Chucks are available in standard- medium-, and heavy-duty versions, and they come complete with air shafts and brakes or clutches, mounted. Technology ...
- Nim-Cor Shaft Repair Video Now Online
- (Web Handling News)
- January 23, 2011, The NimCor airshaft repair process is now demonstrated in a video on the company's web site. Visitors are shown how to replace lugs and/or buttons and remove NASHUA, NH | The NimCor airshaft repair process ...
- Winder Provides Fast Setups
- (Winding Unwinding Rewinding)
- December 31, 2010, Model 902 cantilevered duplex center winder winds to 31.5-in. dia on both shafts. Also will unwind, trim, and rewind to diameters exceeding the maximum Model 902 cantilevered duplex center winder winds ...
- Reflections on Deflection
- (Winding Unwinding Rewinding)
- November 30, 2010, ... that 3-in. dia rollers are rare in processes wider than 60 in., but the 3-in. (75-mm) core remains quite popular by customers and hence must be accommodated by winders. These winding shafts with a length-to-diameter ...
- Platinum Packaging Adds Elite Cameron
- (Slit)
- July 31, 2010, ... to reduce setup times and provide consistent high quality product, such as automatic tension control, differential rewind shafts, and laser knife and core positioning. The company specified a custom paint ...
- Slitting/Rewinding: Platinum Packaging Selects Elite Cameron
- (Slit News)
- July 08, 2010, ... differential rewind shafts (http://pffc-online.com/web_handling/winding_unwinding_rewinding), and laser knife and core positioning (search?searchword=Positioning+System&ord=d&cat=). The Cameron brand ...
- Web Lines: Are You Getting the Shaft?
- (Winding Unwinding Rewinding)
- June 30, 2010, ... all these issues, ergonomics and productivity are the top reasons many folks try to avoid the shaft. Lightweight shafts can greatly reduce ergonomic concerns and help with productivity. In most winding, ...
- Bobst Announces Line-up for Competence '10 Open House
- (Carton Box News)
- June 27, 2010, ... time with four independent advance shafts for even more flexibility; VISIONCUT 106 LE; VISIONFOIL 104 H; and NOVACUT 106 E with Hotplast. The world premier of a top of the line hot foil-stamper that ...
- Control Tension Precisely
- (Tension)
- May 31, 2010, The X-3400 rewind tension controller works to control the slippage of differential winding shafts and controls the torque transferred to the cores. The The X-3400 rewind tension controller works to control ...
- VW Certifies Laminated Composite
- (Coating/Laminating)
- May 31, 2010, GREVEN, GERMANY | Nordenia Intl. reports its NORShield AC (AntiCorrosion) laminated composite has certification from Volkswagen that it corresponds to GREVEN, GERMANY | Nordenia Intl. reports its NORShield ...
- Hybrid Machine Is Servo Driven
- (Slit)
- May 31, 2010, ... drive shafts guaranteeing the operator perfect tension during die-cutting. Six servo drives and a highly automated user interface are said to produce high quality production for wide range of applications. ...
- Slit with Speed
- (Slit)
- May 31, 2010, The B87 HS slitter offers speeds to 2,000 fpm. Benefits include automatic positioning of cutting knives; smart shafts; servo-assisted unloading of finished The B87 HS slitter offers speeds to 2,000 fpm. ...
- Web Guiding | Lateral Motion Causes
- (Web Lines)
- March 31, 2010, ... width recovery from in-roll tension losses, core shifting from equipment misalignment, deflection, or loss of grip between cores and shafts. Beyond this list, perfect handling and perfect winders will ...
- Rewind Many Materials
- (New Products)
- March 31, 2010, ... products. Machine can be optionally equipped for two-up or three-up production, utilizing double or triple core feed, differential winding shafts, and shear-type in-line slitters. Elsner Engineering ...
- Keep Cores from Deforming
- (New Products)
- January 31, 2010, Leaf air shafts reportedly provide the ideal support for thin wall cores of 1 in. or larger to keep cores from deforming during winding. Trapper leaf Leaf air shafts reportedly provide the ideal support ...
- NimCor Expands Customer Support
- (News | New Products)
- January 11, 2010, ... ; 651-982-0262) will provide sales and support to converting customers in Minnesota, North Dakota, South Dakota, and Nebraska. NimCor manufactures a complete line of airshafts, bowed rolls, chucks, ...
- Static, Be Gone!
- (Static-Beat)
- October 31, 2009, ... rubber. Dissipating roller charge is important because charged roller surfaces attract dust particles, cause sparks to the grounded roller shafts, and may pose shock risks to personnel that clean the roller ...
- WHAT'S NEW PRODUCT
- (New Products)
- September 30, 2009, ... come complete with air shafts and brakes or clutches, mounted. Converter Accessory Corp. | 800-433-2413 | www.converteraccessory.com Circle 400 or visit www.freeproductinfo.net/pff Stability ...
- Narrow Web & Label Reporter
- (Narrow Web)
- June 30, 2009, ... both machines, operators benefit from not having to handle shafts at either end of the press. Martin Automatic | www.martinautomatic.com Circle 330 or visit www.freeproductinfo.net/pff Mark Andy ...
- NEW PRODUCT DIGEST - May 2009
- (New Products)
- April 30, 2009, ... pneumatic differential shafts for both 3- and 6-in. cores. Has both razor and shear slitting, auto edge guide, laser core and knife positioning, automatic tension control, layon rolls, and the latest SSD ...
- Surface Winder Is Reversible
- (News Eclips)
- March 03, 2009, ... heavy lifting. Handles rolls up to 1.5 m (4.9 ft) in diameter and film thickness from 15 to 400 microns (0.6 to 16 mil). Winding shafts are available in 76 mm (3 in.) and 152 mm (6 in.) sizes. Accommodates ...