Search
- Show Preview | Labelexpo Europe 2015 Grows To Eight Halls
- (Trends/Management)
- August 18, 2015, ... pulsed DC ionizing bar. The company also will showcase its range of web cleaning systems. MPS (11C20) will demonstrate the new GEW hybrid LED UV system (ArcLED), integrated with the next generation ...
- Static Beat | Laminators Present Static Challenges
- (Coating/Laminating)
- April 05, 2012, ... at lamination. Since this sealed static cannot be neutralized by static dissipaters, such as static bars and ionizing strings, the static dissipaters must neutralize the interior web surfaces prior to ...
- Static Beat | Control Static at the Corona Treater
- (Static-Beat)
- March 12, 2012, ... the exit nip where the web peels from the treater roller. Locate the static bar near the exit nip to suppress the backside discharge. In some applications, the static bar may be replaced by an ionizing ...
- Static Beat | Side Matters
- (Static-Beat)
- February 07, 2012, ... facing on the wrong side of the web. Side matters. To neutralize static, locate the tinsel, ionizing string, or static bar facing the side of the web that has static. Following a nip roller, static will ...
- Static Beat | How To Eliminate Hot Rolls
- (Static-Beat)
- January 16, 2012, ... tube. Fieldmeter reading EHO NIP is taken on a span midway between conveyance roller just after the haul-off nip; EHO NIP ~ -4 KV/cm. The polymer nip roller deposits negative charge on the tube. An ionizing ...
- Static Beat: Beat Winter Static
- (Static-Beat)
- November 22, 2011, ... Please feel free to add items that are important to your operations. 1. Static Neutralizer Care Take good care of your static neutralizers (static bars, ionizing string, etc.) because they are your ...
- Using Electrostatic Voltmeters
- (Static Elimination)
- November 30, 2010, Static problems are challenging to solve because static dissipaters, such as ionizing strings or static bars, should be located to treat the side of the Static problems are challenging to solve because ...
- Static Beat: Prevent Winter Static
- (Static Elimination)
- September 30, 2010, ... will include cleaning the pin tips with a soft brush. Replacing static brushes, tinsel, and ionizing strings annually is a good practice. These passive devices are inexpensive. Measure the gap from ...
- Static Beat: Choosing Passive or Active Ionizers
- (Static Elimination)
- June 30, 2010, ... neutralizers come in two broad categories: passive and active. Passive neutralizers, such as conductive brushes, tinsel, static dissipative fabrics, and ionizing strings and rods, require no external power. ...
- Static Beat: Corona Treaters & Ionizers Compared
- (Static Elimination)
- May 31, 2010, ... dust attraction, and sparks, static neutralizers may be installed along the film conveyance path. Commercially available neutralizers include brushes, tinsels, ionizing strings, static blowers, and static ...
- Static Beat: When To Use Static Blowers
- (Static Elimination)
- January 31, 2010, ... for neutralizing charge on moving films, such as tinsel, ionizing strings, static brushes, and active ionizers (static bars). However, each of these devices must be located properly near the moving film. ...
- How To Prevent Winter Static
- (Static Elimination)
- August 31, 2009, ... best way to avoid winter static. Take good care of your ionizers because they are your workhorses for keeping static levels low. Ionizer output decreases when dust and debris collects on the ionizing ...
- Mastering RFID, Part 2
- (Archive)
- September 29, 2005, ... Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment [3] is a very useful standard for specifying ionizing performance requirements. This Standard defines an ESD protected ...
- Atmospheric Plasma: The New Functional Treatment for Films
- (Magazine)
- January 31, 2001, ... using a controlled level of AC or DC power and an ionizing gas medium. The plasma— commonly called the fourth state of matter—that results is an ensemble of randomly moving charged atomic particles with ...
- Static electricity can be a very costly problem
- (Magazine)
- August 31, 1998, ... the air-knife uses compressed air to blow the ionized air wherever it's needed. Ionizing systems work; the main problem is that customers often don't know where to mount them. For example, the static ...