the PLACE

Providing practical information to the converting and packaging industries…

EXECUTIVE SUMMARY
Non-Polar Process Aids Improve Extrusion Productivity
by Niall Marshall, Sasol Wax

APPLICATION: Non-polar process aids can open the processing window for manufacturers of extruded products to provide opportunities to run faster line speeds without adversely influencing quality. Such aids therefore allow converters to improve productivity and provide opportunities to achieve power savings.
Manufacturers of extruded sheet and film are under incredible pressures to survive in an industry subjected to rising material and energy costs and demanding customers with their own competitive pressures who are unwilling or unable to pay higher prices. Unfortunately, desperate times often call for desperate measures—many converters are under pressure to make drastic decisions simply to remain in business. This is also a time of great challenge that has resulted in considerable innovation and ingenuity. The very difficulties encountered daily in these commodity markets are making the opportunities offered by new resins, new technologies, and on a smaller scale novel non-polar process aids all the more exciting.

Case studies presented in the paper discuss how the addition of a non-polar process aid to polyolefins allowed achieving higher productivity. The material is a highly crystalline, linear, non-polar Fischer-Tropsch hydrocarbon (FTHC) with a melting point of approximately 240°F. A key advantage in the use of non-polar process aids such as additives primarily intended for use as antistats, antifog additives, acid scavengers, slip additives, etc., at higher than recommended levels may also result in processing benefits to polyolefins.

The use of non-polar process aids such as FTHC allows manufacturers of extruded sheet and cast and blown film to adjust their process parameters to increased outputs, improved run stability, and reduced power consumption resulting in increased productivity. Increased productivity generally leads to increased profitability. Reducing power consumption may result in lower utility costs. Although not discussed here the addition of suitable non-polar processing aids has no significant effect on film mechanical properties, printability. or the sealing or welding performance of a film.


EXECUTIVE SUMMARY
Troubleshooting Corona Treatment Issues
by Rory A. Wolf, Enercon Industries Corporation

APPLICATION: Critical troubleshooting and preventative maintenance advice is available to get corona treating equipment back on-line quickly to generate value-adding product for converting lines. The paper also addresses possible problems such as backside treatment and surface over-treatment.
How much does it cost per minute for a production line to be down? Although a quick estimate of lost material production is somewhat simple in terms of downtime multiplied by standard throughput, most production personnel are not privy to direct, indirect, overhead, and other costs also attributable to a downed production line. Every minute of downtime not only directly impacts the profitability of the job being run but also delays subsequent projects that can jeopardize future business.

Because these costs are frequently understated, having troubleshooting information for component systems on production lines such as corona treaters can help mitigate such costs. A review of corona treater instruction manuals, power supply diagnostics, diagnostic options, and the support structure of the supplier are part of an introductory course for production line operators in preparing for potential treater issues.

Preventative maintenance is key to preempting issues arising with surface treaters. Regular cleaning of bare and covered dielectric ground rolls and cleaning of electrodes and inspection of exhaust airflow and air gaps will ensure peak discharging. Controlling ozone by ensuring blower efficiency through the regular cleaning of the exhaust plenum is also important.

This paper recommends conducting a treater system audit on a basis concurrent with maintenance schedules. System audits include inspections of power supplies, station components, and the high voltage transformer. An outline of system checks is available from a treater manufacturer for integration into maintenance procedure manuals and protocols. A treater company service engineer can also perform on-site audit activities with maintenance staffs to bring treater performance back to standard levels and advise new station components including software and hardware to enhance new treater capabilities.


EXECUTIVE SUMMARY
Electron Beam Curable Gas and Aroma Barrier Technology
by Im Rangwalla, Energy Sciences, Inc.

APPLICATION: A new organofunctional silane based electron beam curable gas and aroma barrier technology has use as a coating or adhesive to laminate various similar or dissimilar substrates used in flexible packaging.
Having an adhesive layer that can also provide oxygen barrierproperties is very desirable in flexible packaging applications. The potential to combine barrier properties with the instant bonding properties offered by electron beam (EB) cured laminating adhesive would make the entire manufacturing process very simple and cost effective. This scheme could potentially use commonly available polyester and sealant layers with the desired barrier properties being provided primarily by the adhesive. This paper discusses the development of EB curable barrier adhesives and coatings designed to meet such goals.

The initial goal of the laboratory work was to improve the adhesion of vacuum metallized aluminum layers to biaxially oriented polypropylene and polyester by using organofunctional silanes of the vinyl benzyl amine alkoxysilane class. The idea was to apply such silanes at very low coat weights below 0.5 g/m2 on polyolefin films followed by metallization and EB treatment of the entire structure. This would result in EB grafting of the vinyl group to the polyolefin and the formation of a Si-O-Al bond to the aluminum.

This development resulted in substantially increasing the aluminum adhesion to the polyolefin as desired. It also gave a significant improvement in the barrier properties of the metallized polypropylene structure. More importantly, the barrier property of non-metallized polypropylene also improved. This discovery led to the development of an entire class of organofunctional silanes and ethylenically unsaturated carboxylic acids that provided gas barrier property and adhesive properties upon EB treatment. The oxygen barrier properties probably resulted from the high polarity of the salt created by the unsaturated carboxylic acid and the amino organofunctional silane. Si-O-Si cross-linking and EB curing of the unsaturated carboxylic acid helps to maintain the oxygen barrier and adhesion properties under high humidity conditions.

The new family of EB curable materials developed provide oxygen and aroma barrier. Barrier properties occurred when these materials were used as coatings or adhesives with a broad range of films commonly used in flexible packaging. In addition to the results presented in the paper, these EB curable barrier materials were also tested with several different types of inks including solvent-based flexographic inks. Good adhesion occurred between the inks and the barrier materials. Future work in the development of these materials includes development of aqueous or close to 100% solids adhesive and coating systems, reduction of the dose to cure the barrier adhesive without the use of primer, reduction of the sensitivity to humidity without the use of primer or high EB cure dose, and completion of food law migration work.


EXECUTIVE SUMMARY
The Role of Adhesives In The Retort Pouch
by Thomas R. Mueller, Rohm and Haas Co.

APPLICATION: Adhesives for retort pouches can have various chemistries but must perform on converting equipment and comply with FDA regulations. Knowing interactions by the adhesives with package materials is also important.
Making retort pouches uses multilayer laminations. This paper reviews the various types of laminations and the adhesives used in making them. Food contact regulations for the retort pouch are very important when choosing an adhesive system to construct the pouch. The chemistries of adhesives (solvent based and solventless adhesive systems) used in retort pouch construction, the testing and evaluation of adhesives for retort pouches, and the importance of interactions between the adhesive and other components are also topics of discussion.

The needs of the marketplace are constantly changing, and adhesive suppliers must keep up with such changes. Everyone always wants to improve efficiency, reduce waste, and decrease the environmental impact from adhesives. Some concepts of future adhesives being explored address these concerns. Different reaction mechanisms to achieve polymers of comparable performance to the current polymers used in adhesives are being explored. These mechanisms may lead to faster curing adhesive systems.

Radiation curable adhesives may be a way to improve efficiency because the cure is instantaneous and the potential for waste would be lower. Radiation curable adhesives are also 100% solids systems meaning no solvent discharges to the environment. Aqueous systems with improved performance over the current technology are also undergoing exploration. Solventless adhesives are already finding use for some retort applications. Continual improvement of these adhesive systems may increase their use in retort applications.

Retort packaging constructions are varied and may be proprietary. The chemistry of many adhesives used in retort packaging today is urethane chemistry. Side reactions of the components of urethanes can lead to lower performance of the adhesive. Care is necessary on the part of the converter to ensure that these side reactions do not interfere with adhesive performance. This means checking compatibility of all inks and ensuring that they are dry. Improper mixing of adhesives can also lead to poor performance of an adhesive. Care is necessary to follow curing times and temperatures for retort adhesives. Because many use aliphatic isocyanate chemistry, retort adhesives may take longer to cure, require elevated temperatures to cure, or both. Adhesive suppliers are continually working to improve the chemistry of adhesives to meet the needs of a changing marketplace.



For information about the PLACE Division of TAPPI, access the TAPPI web page at tappi.org. To obtain the complete papers whose expanded summaries appear in this section, go to the TAPPI web site at tappi.org., then click on "the PLACE" in the section designated Journals.


Telephone inquiries are welcome at the TAPPI Service Line by calling 800/332-8686 in the United States, 800/446-9431 in Canada, or 770/446-1400 in other countries. Send FAX to 770/446-6947. Address mail to TAPPI, 15 Technology Parkway South, Norcross, GA, 30092.

Submit manuscripts for publication to dbentley@tappi.org. Obtain information about the PLACE Division from tappi.org.


ePLACE Electronic Newsletter
Receive technical information delivered to your computer every other Monday from the PLACE Division. Subscribe on-line at tappi.org by clicking Newsletters under the People heading.


Visit past communications from the PLACE div. of TAPPI in our the PLACE Archives.


Subscribe to PFFC's EClips Newsletter