Heat Transfer Fluid
- Two-Roll Heated Laminator with Unwind/Rewind
- (Archive)
- November 25, 2007, ... feedback system. The heated laminator accommodates two 250 mm diameter x 750 mm face rolls mounted in precision roller bearings. The top cotton or denim filled roll has a ground finish. The bottom chrome ...
- Heat Wave
- (Magazine)
- September 30, 2007, ... “These sandwiches are prepared in a specially designed microwavable paperboard tray that uses our revolutionary QuiltWave active microwave packaging to heat the bread to a soft and warm consistency, while ...
- Esko-Graphics Transfers Ownership, Packaging Activities to Axcel
- (Archive)
- September 24, 2005, Esko-Graphics announces that its shareholder, Kirkbi A/S, has entered into an agreement with Axcel to transfer the ownership and all packaging-related activities of Esko-Graphics to Axcel. The transaction ...
- CYRO Presents Heat-Aging Effects on Medical Packaging Materials at ANTEC in Chicago
- (Archive)
- June 01, 2004, Medical packaging engineers, device manufacturers, as well as other attendees of this year's ANTEC conference may now have a better understanding of the effects of heat and sterilization on rigid medical ...
- Producing Coextruded High Barrier Heat-Shrinkable Packaging Films
- (The Place)
- September 30, 2003, ... and comparing high barrier polymers and structures provides guidelines for matching film performance with application. The manufacturing process for high barrier heat-shrinkable packaging films is the ...
- Solving the Problem of Silicone Transfer
- (Magazine)
- September 30, 2003, ... reaction and heat. However, even today, state-of-the-art silicone chemistry cannot achieve a full 100% cure of the siliconized surface layer. Directly following the siliconization process — when the ...
- Appleton Launches Line of Thermal-Transfer Security Papers for On-Demand Labels
- (News | New Products)
- May 18, 2003, Appleton recently announced the development and release of a new line of thermal-transfer label security papers that include its TechMark taggants and Read/Write threads. APPLETON, WI, USA—Appleton recently ...
- Transferring HR Data to US from EU May Hit a Snag
- (Magazine)
- March 31, 2003, It may surprise some members of the converting industry with subsidiaries in the European Union that the EU's framework Data Directive and implementing national legislation could restrict the transfer ...
- Focus on Crosslinking in Fluid Ink Systems
- (Magazine)
- May 31, 2002, ... These inorganic additives react with resin and substrate carboxylate groups to provide zinc or zirconium ion links, which result in higher heat and alcohol resistance. Such additives commonly are used ...
- Graphics of the Americas 2002: Business Heats Up in Miami
- (News | New Products)
- February 24, 2002, ... It seems, however, with the onset of the new year and its first printing industry trade show, business is heating up. It may not quite be at a rolling boil, but according to companies like Heidelberg, ...
- Control of Adhesion and Removal of Heat Sealable Tops on Polymer Containers
- (Magazine)
- December 31, 2001, ... two polymer surfaces by forcing them into intimate contact while they are in at least a partially molten state. Failure of a heat seal bond always initiates at the weakest point. This can be adhesive failure, ...
- Kurz Transfer Products and General Roll Leaf Expand Partnership
- (News | New Products)
- August 26, 2001, Kurz Transfer Products announces an expanded partnership with General Roll Leaf. According to the co., General Roll Leaf has long offered Kurz foils as an integral part of its product line, but an expanded ...
- Assessing the Potential for Ink Transfer and Migration
- (Magazine)
- June 30, 2001, Potential transfer…depends on many factors, such as degree of cure, ink adhesion, pressure between cups, length of time in contact, etc. Recently, I received an e-mail in which a reader questioned ...
- Pellet Transfer: Preventative Measures Employed to Reduce Streamer Formation
- (Magazine)
- April 30, 2001, ... and fittings. This sliding action produces frictional heat that can cause the pellet to melt and smear along the walls of the transfer pipe. The melted smear can release from the walls of the pipe creating ...
- Air Gap Dynamics: Effect on Molecular Properties and Heat Seal
- (Magazine)
- December 31, 2000, ... dynamic factors such as heat, oxidation, shear, and time on the mechanical, physical, and processing properties of polyethylene extrusion coatings. The study used a polyethylene having a melt index of ...
- Some Causes of Blocking in Heat Seal CoatingsPart II
- (Magazine)
- October 31, 2000, Last month this column covered some causes of blocking when using heat seal coatings. The problem primarily addressed concerned processing conditions Last month this column covered some causes of blocking ...
- Common Causes of Blocking in Heat Seal CoatingsPart I
- (Magazine)
- September 30, 2000, Heat seal coatings are formulated materials that are applied to a substrate on a coater and then wound into a roll. In a subsequent operation, the coated Heat seal coatings are formulated materials that ...
- Electrically Heated Rollers Are Top Technology Choice
- (Magazine)
- March 31, 2000, The Thermalon line of electrically heated rollers from American Roller Co., Union Grove, WI, has won the 2000 Technology of the Year Competition sponsored The Thermalon line of electrically heated rollers ...
- Ceramic heater rollers an exciting new alternative.
- (Magazine)
- July 31, 1995, New heater roller technology is reportedly yielding reduced warmup and temperature-recovery times while reducing maintenance downtime and improving process New heater roller technology is reportedly yielding ...
- Reynolds subsidiary in Spain benefits from technology transfer
- (Magazine)
- May 31, 1995, Grafiba SA, a subsidiary of Reynolds Metals Co., started as a manual converter of paper bags and has grown into one of the first firms in Spain to use Grafiba SA, a subsidiary of Reynolds Metals Co., started ...
- IDENTCO Highlights Automation Capabilities and PCB Labeling at PCB East
- (News | New Products)
- May 13, 2024, Company to showcase label feeders and product solutions to simplify automation. Company to showcase label feeders and product solutions to simplify automation. IDENTCO – a manufacturer of high-performance ...
- CJ Biomaterials Expands PHA Offering, Introduces New Semi-Crystalline PHA Biopolymer at NPE 2024
- (News | New Products)
- May 07, 2024, ... for applications that require high-heat stability. It can be processed using various conversion technologies, such as injection molding, thermoforming, film, sheet, and fiber. In addition to being TÜV ...
- HOW TO: Eliminate Press Downtime
- (HOW TO Guide)
- May 02, 2024, ... to the unit, so a quick swapping out of equipment can be done in minutes and not months. Our heating system now has an automatic shut off that will prevent the unit from burning up if someone leaves the ...
- Surface Tension and Wettability
- (Surface Prep)
- May 01, 2024, Key Principles for Quality Production in Converting Key Principles for Quality Production in Converting By Melissa Lang, Vice President, Jemmco, LLC Surface tension and wettability are essential ...
- Understanding Anilox Scoring: Causes, Effects, and Prevention
- (Equipment/Machines - Printing)
- May 01, 2024, Anilox scoring, a persistent issue in the printing industry, continues to challenge printers despite numerous discussions about its root causes and preventive measures. Anilox scoring, a persistent ...
- SOMA set to showcase the Optima2 10-color flagship flexo press during drupa 2024
- (News | New Products)
- April 30, 2024, ... well as heat/cold seal capabilities. While drupa attendees will witness the advanced capabilities of the SOMA Optima2 flexo press and other state-of-the-art equipment, SOMA is also excited to introduce ...
- Why Cleaning is a Must in the Flexo Industry
- (Equipment/Machines - Printing)
- April 28, 2024, ... that uses no chemicals, making it environmentally friendly. It's a fast, high-quality, effective method which can reduce cleaning times. The anilox surface is not heated during cleaning, so the roll can ...
- Sandon Global to bring anilox excellence and technical know-how to drupa 2024
- (News | New Products)
- April 21, 2024, Sandon Global, the British anilox manufacturer and drupa 2024 exhibitor, is poised to showcase its extensive technical expertise in flexographic printing Photo courtesy of Sandon Global Sandon ...
- A New Era in Sustainable Packaging
- (News | New Products)
- March 26, 2024, ... wrap packaging material is usually made from polymer plastic film. When heated, it shrinks tightly over the item it is covering. Shrink wrap and shrink film are very versatile materials and can be used ...
- Pressure on Paper Packaging Converters
- (Flexpack)
- March 24, 2024, How Label Suppliers are Key to Meeting Sustainability Goals How Label Suppliers are Key to Meeting Sustainability Goals By Amy Donato, PPG Global Platform Director, TESLIN® The data doesn’t ...